NT 50-DP-EN DP Master to EtherNet/IP Adapter

NT 50-DP-EN

Gateway PROFIBUS DP Master to EtherNet/IP Adapter
  • Integrates a single PROFIBUS DP Slave into a EtherNet/IP network
  • Short I/O data conversion time lower than 20 ms
  • Extremely space-saving compact design
  • Loadable Firmware for flexible use of other conversions

NT 50-DP-EN

Gateway PROFIBUS DP Master to EtherNet/IP Adapter
  • Integrates a single PROFIBUS DP Slave into a EtherNet/IP network
  • Short I/O data conversion time lower than 20 ms
  • Extremely space-saving compact design
  • Loadable Firmware for flexible use of other conversions

  • Description
  • Specification

netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.

The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.

 

Product

 

Product name : NT 50-DP-EN

Part number : 1758.110

Brief description : Gateway PROFIBUS DP to Ethernet

Communication controller

 

Communication controller

Integrated Memory

 

RAM : 8 MB SDRAM

FLASH : 4 MB serial Flash

Power supply Supply voltage : 24 V ± 6 V DC
Current consumption at 24 V (typically) : 72 mA / 150 mA (with short circuit at the output of PROFIBUS)
Typical power consumption : 1,8 W
Connector type : Mini-COMBICON, 2-pin
Communication interface 1 Communication interface : PROFIBUS DP
Interface type : RS-485, optically isolated
Connector type : D-Sub female, 9-pin
Communication interface 2 Communication interface : Ethernet
Interface type : 100 BASE-TX or 10 BASE-T, isolated
Connector type : 1 * RJ45
Diagnostic interface Type : Ethernet, 4-pin
Connector type : RJ45 socket
Display Display 1 : SYS System status
Display 2 : APL Application status
Display 3 : COM Communication status
Display 4 : LINK Link, ACT Activity
Permitted ambient conditions Ambient temperature (operation) : 0 … +60 °C
Relative humidity (operation) : no condensation allowed
Device Dimensions (L x W x H) : 100 x 26 x 66 mm (without connector)
Weight : appr. 80 g
Degree of protection : IP 20
Mounting type : on DIN rail EN 60715
Configuration Configuration software : SYCON.net
Conformity RoHS : Yes
Conformance with EMC directives CE sign : Yes
Emission : CISPR 11 Class A
Immunity : EN 61131-2:2003
Get Instant Quote

Related Product:-