NT 50-DP-EN Gateway PROFIBUS DP Slave to EtherNet/IP Scanner
NT 50-DP-EN
Gateway PROFIBUS DP Slave to Open Modbus/TCP- Integrates Modbus TCP devices into a PROFIBUS DP network
- Flexible use of Modbus TCP as Client or Server
- Short I/O data conversion time lower than 20 ms
- Extremely space-saving compact design
- Description
- Specification
netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.
The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.
|
Product |
Product name : NT 50-DP-EN Part number : 1758.110 Brief description : Gateway PROFIBUS DP to Ethernet |
| Communication controller |
Communication controller< : netX 50/span> |
| Integrated Memory |
RAM : 8 MB SDRAM FLASH : 4 MB serial Flash |
| Power supply |
Supply voltage : 24 V ± 6 V DC Current consumption at 24 V (typically) : 72 mA / 150 mA (with short circuit at the output of PROFIBUS) Typical power consumption : 1,8 W Connector type : Mini-COMBICON, 2-pin |
| Communication interface 1 |
Communication interface : PROFIBUS DP Interface type : RS-485, optically isolated Connector type : D-Sub female, 9-pin |
| Communication interface 2 |
Communication interface : Ethernet Interface type : 100 BASE-TX or 10 BASE-T, isolated Connector type : 1 * RJ45 |
| Diagnostic interface |
Type : Ethernet, 4-pin Connector type : RJ45 socket |
| Display |
Display 1 : SYS System status Display 2 : APL Application status Display 3 : COM Communication status Display 4 : LINK Link, ACT Activity |
| Permitted ambient conditions |
Ambient temperature (operation) : 0 … +60 °C Relative humidity (operation) : no condensation allowed |
| Device |
Dimensions (L x W x H) : 100 x 26 x 66 mm (without connector) Weight : appr. 80 g Degree of protection : IP 20 Mounting type : on DIN rail EN 60715 |
| Configuration |
Configuration software : SYCON.net |
| Conformity |
RoHS : Yes |
| Conformance with EMC directives |
CE sign : Yes Emission : CISPR 11 Class A Immunity : EN 61131-2:2003 |
We Bluboxx Communications Are Leading Supplier Of Fieldbus Gateways In Pune, India. Our Fieldbus Gateways Are Specially Designed To Withstand Seamless Communication Between Fieldbus And Industrial Ethernet Devices.
NETTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.
We Provide complete Industrial Networking Solutions in Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, GOA, Gurgaon, PAN India
