IGW1114

IGW1114


  • Support 4 3IN1 serial ports and 2 10/100Base-T(X) self-adaptive Ethernet interfaces
  • Support conversion between Modbus RTU/ASCII and Modbus TCP protocol
  • Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes
  • Support -40~75℃ wide temperature operation

  • Description
  • Specification

IGW1114-4DI(3IN1)-DB-2P(12~48VDC) of Modbus gateway is designed for integrating Modbus RTU/ASCII and Modbus TCP; it can achieve the conversion between Modbus RTU/ASCII and Modbus TCP protocol. This product supports 4 3IN1 serial ports and 2 100M Ethernet copper ports. They adopt DIN-Rail or wall mounting to meet the requirements of different application scenes.

Modbus gateway supports multiple network protocols, such as Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS and DHCP protocols. It possesses complete management function, and supports access control, rapid configuration, online upgrading, etc. RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes are supported; it supports up to 32 TCP Slave requests under Master mode and 16 TCP Master connections under Slave mode. TELNET, WEB and other access modes are also supported. It can provide you with good user experience via friendly design of network management system interface, simple and convenient operation.

DIP switch can achieve the device restore factory defaults. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in PLC control and management, Building Automation System, Health Care Automation System, measuring instrument and environmental forces monitoring system.

discover this Features and Benefits

  • Support 2 10/100Base-T(X) self-adaptive Ethernet interfaces, provide dual IP and MAC addresses to meet the requirements of multiple network management or backups
  • Support 300bps-115200bps line speed and non-blocking communication
  • Support RTS/CTS, DTR/DSR and XON/XOFF flow control
  • Support response timeout setting of characters
  • Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes
  • Support up to 32 TCP Slave requests under Master mode
  • Support up to 16 TCP Master connections under Slave mode
  • Support virtual and real ID mapping to achieve flexible access between Master and Slave devices
  • Support IP address and MAC address filtering, which is easy to achieve accurate access control
  • Support classification of user management to achieve humanized permission management
  • Support monitoring for serial port status and parameters, so the communication status will be clear at a glance
  • Support Windows configuration tool, TELNET, WEB configuration forms and access control
  • File management is convenient for the device rapid configuration and online upgrading

 

Ethernet Port

 

Standard: 10Base-T, 100Base-TX

Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS

Rate: 10/100M automatic flow control, MDI/MDI-X autotunning

Interface quantity: 2

Interface form: RJ45

Duplex mode: full/half duplex mode self-adaption

 

Serial Port

 

Standard: EIA RS-232C, RS-485, RS-422

Protocol: Modbus RTU/ASCII

Quantity of serial port: 4 3IN1 serial port

RS-232 signal: RXD, TXD, GND

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 300-115200bps

Data bit: 7bit, 8bit

Parity bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 2bit

Interface form: DB9 Male

Directional control: RS-485 direction adopts Automatic Data Direction Control technology

Pull high/low resistor for RS-485: 4.7kΩ

Intensity of electromagnetic isolation: 2KV

Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave

Connection quantity: up to 32 TCP Slave requests are supported under Master mode

                                      up to 16 TCP Master connections are supported under Slave mode

 

Configuration

 

WEB configuration management, TELNET configuration, Windows configuration tool

 

Security

 

Classification of User Permissions, IP address filtering, MAC address filtering, WEB Console, TELNET Console

 

 

Indicator

 

Power supply indicator, running indicator, Ethernet port indicator, serial port indicator

 

Power

Requirement

 

 

12~48VDC, 4-pin terminal blocks

Power supply nonpolarity

 

Power

Consumption

 

No-load: 2.59W@48VDC

Full-load: 2.93W@48VDC

 

Environmental

Limit

 

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95%(no condensation)

 

Physical

Characteristic

 

Housing: IP40 protection, metal

Installation: DIN-Rail or wall mounting

Dimension (W x H x D): 53mm×138mm×110mm

Weight: 640g

 

Industrial

Standard

 

IEC 61000-4-2 (ESD, Electro-static Discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV


IEC 61000-4-4 (EFT/B, Electrical Fast Transient/Burst), Level 3

Power supply: ±2kV

Signal: ±1kV


IEC 61000-4-5 (Surge), Level 3

Power supply: common mode ±2kV, differential mode ±1kV

Signal: common mode ±2kV, differential mode ±1kV


Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

 

Certification

 

CE, FCC, RoHS

 

Warranty

 

3 years

 

Please send us your requirement

Related Product:-