Hardware Specifications | |
---|---|
Copper Ports | 16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots | 4 100/1000BASE-X SFP interfaces Compatible with 100BASE-FX SFP transceiver |
Console | 1 x RS232-to-RJ45 serial port (115200, 8, N, 1) |
Switch Architecture | Store-and-Forward |
Switch Fabric | 40Gbps/non-blocking |
Throughput | 29.76Mpps@64Bytes |
Address Table | 8K entries, automatic source address learning and aging |
Shared Data Buffer | 4M bits |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Jumbo Frame | 9K bytes |
Reset Button | < 5 sec: System reboot > 5 sec: Factory default |
Dimensions (W x D x H) | 440 x 200 x 44.5 mm, 1U height |
Weight | 2672g |
LED | System: AC (Green), DC1 (Green), DC2 (Green), Fault ( Red ) Ring (Green), R.O. (Green), DI/DO ( Red ) 10/100/1000T RJ45 Interfaces (Port 1 to Port 16): 1000Mbps LNK/ACT (Green) 10/100Mbps LNK/ACT (Orange) 100/1000Mbps SFP Interfaces (Port 17 to Port 20): 1000Mbps LNK/ACT (Green) 100Mbps LNK/ACT (Orange) |
Power Consumption | Max. 15.2 watts/51.8 BTU |
Power Requirements – AC | AC 100~240V, 50/60Hz 0.4A |
Power Requirements – DC | DC 36~60V, 0.6A |
DI/DO | 2 Digital Input (DI): Level 0: -24~2.1V Level 1: 2.1~24V Max. input current: 10mA 2 Digital Output (DO): Open collector to 24VDC, 100mA |
ESD Protection | 6KV DC |
Layer 2 Management Functions | |
Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable |
Port Status | Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status |
Port Mirroring | TX/RX/Both Many-to-1 monitor |
VLAN | 802.1Q tagged based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN IP subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs |
Link Aggregation | IEEE 802.3ad LACP/static trunk 10 groups with 8 port per trunk |
Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) |
QoS | Traffic classification based, strict priority and WRR 8-level priority for switching: - Port number - 802.1p priority - 802.1Q VLAN tag - DSCP/ToS field in IP packet |
IGMP Snooping | IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP querier mode support |
MLD Snooping | MLD (v1/v2) snooping, up to 255 multicast groups MLD querier mode support |
Access Control List | IP-based ACL/MAC-based ACL Up to 256 entries |
Bandwidth Control | Per port bandwidth control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps |
Layer 3 Functions | |
IP Interfaces | Max. 8 VLAN interfaces |
Routing Table | Max. 32 routing entries |
Routing Protocols | IPv4 software static routing IPv6 software static routing |
Management | |
Basic Management Interfaces | Console/Telnet/Web browser/SNMP v1, v2c |
Secure Management Interfaces | SSH, SSL, SNMP v3 |
SNMP MIBs | RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 1588v2 RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 FRC 3810 MLD v2 |
Environment | |
Operating | Temperature: -10 ~ 60 degrees C for AC power input Temperature: -40 ~ 75 degrees C for DC power input Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -40 ~ 80 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Search Products
Search Products
IGS-5225-16T4S
- 16-port 10/100/1000BASE-T RJ45 copper
- 4 100/1000BASE-X mini-GBIC/SFP slots, compatible with 100BASE-FX SFP
- RJ45 to RS232 DB9 console interface for basic management and setup
- Description
- Specification
- Application
With 16 10/100/1000Mbps ports, 4 100/1000X SFP connectors, and support for static Layer 3 routing in a 1U case, the PLANET IGS-5225-16T4S is a new industrial Layer 2+ controlled Gigabit Switch. The IGS-5225-16T4S can handle enormous amounts of data in a secure topology linking to an industrial backbone or high capacity servers, thanks to its total switch fabric speed of 40Gbps. The IGS-5225-16T4S can deliver non-blocking switch fabric and wire-speed throughput in the -40 to 75 degree Celsius temperature range without any packet loss or CRC error. Upgrading the industrial LAN to meet rising bandwidth demands is made significantly easier as a result. Additionally, it uses an approachable "Front Access" design that makes wiring and maintaining the IGS-5225-16T4S when it is mounted in a cabinet simple.
A/C and DC Continuity of Operation through Redundant Power
In order to assure continuous operation, the IGS-5225-16T4S has two 3660V DC power supplies and a 100240V AC power supply that are used as backup power sources. To meet the needs of high-tech facilities demanding the highest power integrity, it has a redundant power system that is especially made for the job. The IGS-5225-16T4S can also be used as a telecom level device and deployed in practically any challenging environment thanks to the 3660V DC power supply that is implemented.
External alarm input and output digital signals
The IGS-5225-16T4S has a front-panel Digital Input and Digital Output for an external alarm device to assist network administrators in effectively managing unforeseen network conditions. An external device like a door incursion detector can be detected and its status recorded via the digital input. When the IGS-5225-16T4S's port link is down or there is a power loss, an alarm could be sent using the digital output.
A Successful Alarm Alert for Greater Protection
Fault Alarm is a feature supported by the IGS-5225-16T4S that can notify users of switch malfunctions. Users would save time by not having to search for the issue if this ideal functionality existed. Saving time and resources will be facilitated.
Dual-Stack IPv6 and IPv4
Data centers, campuses, telecommunications, and other organizations can experience the IPv6 era with the least amount of investment thanks to the IGSW-24040T's support for both IPv6 and IPv4 protocols. This is because its network facilities do not need to be changed or upgraded if an IPv6 FTTx edge network is set up.
Secure and Flexible Management Using Layer 3 IPv4 and IPv6 VLAN Routing
The IGSW-24040T provides IPv4/IPv6 VLAN routing functionality that enables crossover across several VLANs and IP addresses in order to have a highly-secured, flexible administration, and easier networking application.
Strengthened Layer 2 Features
The IGSW-24040T may be configured to perform sophisticated switch management tasks such dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control, and IGMP/MLD Snooping. The IGSW-24040T's link aggregation of supported ports enables fail-over as well as the operation of a high-speed trunk combining with numerous fiber ports.
Efficacious Protection
A complete layer 2 to layer 4 Access Control List (ACL) is provided by the IGSW-24040T to ensure that security is enforced all the way to the edge. It can be utilized to impose network access restrictions by rejecting packets based on the source and destination IP addresses, TCP/UDP ports, or predefined common network applications. Its protection system additionally includes 802.1X user, device, and MAC-based authentication. Communication between edge ports can be stopped using the private VLAN capability, protecting user privacy. Additionally, the IGSW-24040T has DHCP spying, IP Source Guard, and Dynamic ARP Inspection features to guard against IP spying attacks and toss out ARP packets with erroneous MAC addresses. Network managers may now build extremely secure business networks with a lot less time and effort than in the past.
Excellent traffic management
The IGSW-24040T is equipped with strong QoS and traffic management features to improve connection services provided by telecommunications and ISPs. For applications used by multi-tenant units, multi-business units, Telco, and network service providers, the QoS features include wire-speed Layer 4 traffic classifiers and bandwidth limits. It also gives the industrial environment the ability to fully utilize the constrained network resources and ensures the greatest transmission performance for VoIP and video conferencing.
Management that is Effective and Secure
The IGSW-24040T L2+ Managed Switch provides a user-friendly, platform-independent management and configuration facility with built-in Console, Web, and SNMP management interfaces. Based on the SNMP Protocol standard, any management program can manage SNMP. It gives Cisco-like commands via Telnet or the console port, which cuts down on the amount of time it takes to learn a new product. The fact that it supports SSH, SSL, and SNMP v3 connections, which encrypt the packet content during each session, also allows it to provide secure remote management.
Extension and Flexibility Solution
Due to the 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules, the IGSW-24040T's four mini-GBIC ports offer dual speed. The administrator can now pick the best SFP transceiver based on the desired transmission speed as well as the required transmission distance. With multi-mode fiber, the range can be increased to 2 km, while single-mode fiber or WDM fiber can be used to expand the range to 10/20/30/40/50/70/120 km. They work effectively for industrial data centers and distribution applications.
Diagnosis Mechanism for Intelligent SFP
The IGSW-24040T offers the SFP-DDM (Digital Diagnostic Monitor) capability, which makes it more simpler for network administrators to track real-time SFP characteristics like temperature, optical output power, optical input power, laser bias current, and transceiver supply voltage.
Details Regarding Orders
Industrial L2+ 16-Port 100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch, IGS-5225-16T4S (-40 to 75 degrees C).
Ordering Information
IGS-5225-16T4S | Industrial L2+ 16-Port 10/100/1000T + 4-Port 100/1000X SFP Managed Ethernet Switch (-40~75 degrees C) |
Critical Network Applications: Redundant Ring, Quick Recovery
The IGS-5225-16T4S offers redundant ring technology and has a powerful, quick self-recovery capability to shield against disruptions and intrusions from the outside world. It integrates cutting-edge ITU-T G.8032 ERPS (Ethernet Ring Protection Switching), Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer's industrial automation network to improve system dependability and uptime in tough production conditions. The recovery time of a data link can be as quick as 20ms in a certain, straightforward Ring network.
Application for Layer 3 VLAN Routing
The IGS-5225-16T4S guarantees dependable routing between VLANs and network segments with the help of its inbuilt, powerful Layer 3 routing protocols. With up to 32 routing entries, the VLAN interface can implement routing protocols. The IGS-5225-16T4S delivers higher security, greater control, bandwidth conservation, and high-speed uplink, making it unquestionably the best option for industries.
Details Regarding Orders
Industrial L2+ 16-Port 10/100/1000T + 4 Port 100/1000X SFP Managed Ethernet Switch (-40 to 75 degrees C) IGS-5225-16T4S
Related Products
“We are one of the Leading Supplier for Rack-mount Managed Ethernet Switch.
The IGS-5225-16T4S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a certain, simple Ring network, the recovery time of data link can be as fast as 20ms.
We supplies Rack-mount Managed Ethernet Switch – IGSW-24040T, IGS-5225-16T4S in Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, GOA, Gurgaon, PAN India “