Hardware Specifications | |
---|---|
Copper Ports | 6 10/100/1000BASE-T dustproof RJ45 auto-MDI/MDI-X ports |
PoE Injector Port | 4 ports with 802.3at/af PoE injector function (Port-3 to Port-6) |
Power Connector | 1 x M12, 5-pin A-Coded male connector |
Switch Architecture | Store-and-Forward |
Switch Fabric | 12Gbps/non-blocking |
Throughput | 8.9Mpps@64bytes |
Address Table | 8K entries, automatic source address learning and aging |
Shared Data Buffer | 4M bits |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Jumbo Frame | 9K bytes |
Reset Button | < 5 sec: System reboot > 5 sec: Factory default |
Dimensions (W x D x H) | 132 x 75 x 160 mm |
Weight | 809g |
Enclosure | IP50 metal case |
Installation | Wall-mount and DIN rail kit |
LED | System: PWR1 (Green), PWR2 (Green), Fault (Red) Ring (Green), R.O. (Green) 10/100/1000T RJ45 Interfaces (Port 1 to Port 2): LNK/ACT (Green) 10/100/1000T RJ45 Interfaces (Port 3 to Port 6): LNK/ACT (Green) PoE-in-Use (Orange) |
Power Consumption | Max. 165.3 watts/563.67 BTU |
Power Requirements | Dual 48~56V DC (>53V DC for PoE+ output recommended) |
ESD Protection | 6KV DC |
Power over Ethernet | |
PoE Standard | IEEE 802.3af/802.3at PoE/PSE |
PoE Power Supply Type | End-span |
PoE Power Output | IEEE 802.3af Standard - Per port 48V~53V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard - Per port 53V~56V DC (depending on the power supply), max. 36 watts |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Budget | 144 watts max. (depending on power input) |
PoE Ability | PD @ 7 watts: 4 units PD @ 15.4 watts: 4 units PD @ 30.8 watts: 4 units |
Layer 2 Management Functions | |
Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable |
Port Status | Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status |
Port Mirroring | TX/RX/Both Many-to-1 monitor |
VLAN | 802.1Q tagged based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs |
Link Aggregation | IEEE 802.3ad LACP/static trunk 3 groups with 2 ports per trunk |
Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) |
QoS | Traffic classification based,strict priority and WRR 8-level priority for switching: - Port number - 802.1p priority - 802.1Q VLAN tagging - DSCP/ToS field in IP packet |
IGMP Snooping | IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP querier mode support |
MLD Snooping | MLD (v1/v2) snooping, up to 255 multicast groups MLD querier mode support |
Access Control List | IP-based ACL/MAC-based ACL Up to 256 entries |
Bandwidth Control | Per port bandwidth control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps |
Layer 3 Functions | |
IP Interfaces | Max. 8 VLAN interfaces |
Routing Table | Max. 32 routing entries |
Routing Protocols | IPv4 software static routing IPv6 software static routing |
Management | |
Basic Management Interfaces | Telnet, Web browser, SNMP v1, v2c |
Secure Management Interfaces | SSH, SSL, SNMP v3 |
SNMP MIBs | RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP Power over Ethernet MIB |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Railway Traffic | *EN50155 |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az EEE (Energy Efficient Ethernet) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 FRC 3810 MLD v2 ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) |
Environment | |
Operating | Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -40 ~ 80 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Standard Accessories | |
Packet Contents | 6 x Waterproof RJ45 Connector 1 x M12 5-pin A-coded female connector power cable, 1.2m 1 x Wall-mount kit 1 x DIN-rail kit 1 x M12 Power Waterproof Cap 1 x Quick Installation Guide |
Search Products
Search Products
IGS-5226-4P2T
Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
Complies with IEEE 802.3af Power over Ethernet end-span PSE
Up to 4 ports of IEEE 802.3af/802.3at devices powered
Supports PoE Power up to 36 watts for each PoE port
- Description
- Specification
- Application
Acceptable in an industrial setting
With its IP50-rated industrial case, 4-port 10/100/1000T 802.3at PoE, 2-port 10/100/1000T, and static Layer 3 routing, the PLANET IGS-5226-4P2T Industrial Layer 2+ Managed Ethernet Switch offers a high level of immunity against electromagnetic interference and powerful electrical surges that are typically found on plant floors or in curb-side traffic control cabinets. It is simple to mount the IGS-5226-4P2T on a wall or DIN rail, which takes up less room. The four Gigabit PoE+ ports each have a power capacity of 36 watts, so a total power budget of up to 144 watts can be used concurrently without taking into account the various PoE applications being used. Additionally, it offers small businesses and corporations a quick, secure, and affordable Power over Ethernet network solution for IP security cameras.
Shielded Plug and Dustproof RJ45 Ethernet Connector
The 6-port 10/100/1000BASE-T auto-negotiation dustproof RJ45 connector on the IGS-5226-4P2T has four IEEE 802.3at PoE+ ports (Ports 3 to Port 6), each of which can produce 36 watts of power. The standard UTP cable can be made dust-proof with these shielded RJ45 plugs. It offers a tight and strong connection and has an IP50 industrial protection certification, which means it can tolerate humidity, filth, dust, shock, vibrations, heat, and cold. When coupled to the dustproof RJ45 connector.
Environmentally Resistant Architecture
The IGS-5226-4P2T can function in a temperature range of -40 to 75 degrees C and can shield itself against dust entry. In any challenging environment, all of these features guarantee the highest level of reliability for mission-critical applications.
High Availability Network System Dual Power Input
To increase system dependability and uptime, the IGS-5226-4P2T has a robust dual power input system (Dual 48V56V DC) integrated into the customer's automation network. For instance, the hardware failover feature will be enabled immediately to continue powering the IGS-5226-4P2T using DC Power 2 in lieu of DC Power 1 without any interruption to operation.
Gigabit Ethernet PoE Networking with Centralized Power Management
The IGS-5226-4P2T has high-performance Gigabit IEEE 802.3at PoE+ (up to 36 watts) on all ports to meet the demands of greater power necessary PoE network applications with Gigabit speed transmission. It flawlessly satisfies the power needs of PoE VoIP phones, PoE Wireless APs, and all varieties of PoE IP cameras, including IR, PTZ, speed dome cameras, and even box-style IP cameras with an integrated fan and heater for high power consumption. Because there are no longer any limitations on where network devices can be placed near power outlets, the IGS-5226-4P2T's PoE features also assist in lowering deployment costs. Power and data switching are combined into a single device that is managed centrally and delivered via a single connection. Thus, it eliminates the need for extra AC wire and speeds up installation.
Built-in Special PoE Features for Management of Surveillance
The IGS-5226-4P2T is a managed PoE switch for a surveillance network and has the following clever PoE management features:Check PD AlivePlans for Power Recycling Alert for SMTP/SNMP Trap Events PoE Calendar
Alive Check for Intelligent Powered Device
The IGS-5226-4P2T can be set up to use ping action to continuously check on the condition of a connected PD (Powered Device). When the PD stops functioning and doesn't respond, the IGS-5226-4P2T will restart the PoE port power and restart the PD. Through the PoE port resetting the PD's power source, it will considerably improve network reliability while lessening the administrative cost.
Scheduled Power Recyling
Each of the connected PDs may reboot every week at a predetermined time thanks to the IGS-5226-4P2T. As a result, it will lessen the possibility of a buffer overflow-related PD crash.
Alert for SMTP/SNMP Trap Events
Although the majority of NVR or camera management software provides SMTP email alert functionality, the IGS-5226-4P2T additionally offers event alert functionality to help identify abnormal devices caused by network connection loss, PoE power loss, or a device rebooting in response to the PD Alive Check process.
Schedule of Energy for PoE
The IGS-5226-4P2T is undoubtedly appropriate to establish any PoE network, including VoIP and wireless LAN, in addition to being used for IP surveillance. The IGS-5226-4P2T can effectively control the power supply in accordance with the global trend of energy conservation and contribute to the protection of the environment on Earth in addition to its capacity to deliver high watts of power. The "PoE schedule" function, a potent tool for SMBs and corporations to conserve money and energy, enables or disables PoE power feeding for each PoE port during predetermined time intervals.
Fast Recovery for Critical Network Applications with Redundant Ring
To avoid disruptions and outside intrusions, the IGS-5226-4P2T utilizes redundant ring technology and has a powerful, quick self-recovery capability. To increase system dependability and uptime in challenging factory conditions, it integrates modern ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system. The recovery time of a data link in a certain, straightforward Ring network can be as quick as 20ms.
Dual IPv6/IPv4 Stack
The IGS-5226-4P2T supports both IPv6 and IPv4 protocols, making it possible for data centers, universities, telcos, and other organizations to transition to the IPv6 era with the least amount of financial outlay. This is because existing network infrastructure may be used with an IPv6 FTTx edge network.
Layer 3 VLAN Routing for Secure and Flexible Management using IPv4 and IPv6
The IGS-5226-4P2T offers layer 3 IPv4/IPv6 VLAN routing, which enables crossover of different VLANs and different IP addresses for the purpose of having a highly-secure, flexibly-managed, and straightforward networking application. It also offers ultra high transmission performance, excellent layer 2 and layer 4 technologies.
Dependable Layer 2 features
Advanced switch management features like dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control, and IGMP/MLD Snooping can be programmed into the IGS-5226-4P2T. The IGS-5226-4P2T enables the operation of a high-speed trunk to combine with numerous fiber ports and supports fail-over via link aggregation of supporting ports.
Purchase Information
Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40 to 75 degrees C), model number IGS-5226-4P2T.
Datasheet
High Availability Networking for a Security System
To stop interruptions and outside intrusions, the IGS-5226-4P2T has a powerful, quick self-recovery capacity. It integrates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) into the automation network of the customer to increase system uptime and dependability. The IGS-5226-4P2T is the best option for surveillance systems to establish high bandwidth and redundant connections for public transmission systems and railway transmission.
Layer 3 PoE Application with VLAN Routing
The IGS-5226-4P2T guarantees dependable routing between VLANs and network segments with the help of its inbuilt, powerful Layer 3 routing protocols. With up to 32 routing entries, the VLAN interface can implement routing protocols. The IGS-5226-4P2T delivers higher security, greater control, bandwidth conservation, and high-speed uplink, making it unquestionably the best option for industries.
Purchase Information
Industrial EN50155 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch (-40 to 75 degrees C), model number IGS-5226-4P2T.
Related Products
We Bluboxx Communication Providing Wide Range L2+ Ring Managed Gigabit Ethernet Switch.
Our Product Igs-5226-4P2T Which Complies With Ieee 802.3At Power Over Ethernet Plus End-Span Pse And Ieee 802.3Af Power Over Ethernet End-Span Pse Up To 4 Ports Of Ieee 802.3Af/802.3At Devices Powered Supports Poe Power Up To 36 Watts For Each Poe Port. We Provide Complete Industrial Networking Solutions In Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, Goa, Gurgaon, Pan India