Search Products
Search Products
IGS-604HPT-M12
Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
Complies with IEEE 802.3af Power over Ethernet end-span PSE
Up to 4 ports of IEEE 802.3af/802.3at devices powered
Supports PoE Power up to 36 watts for each PoE port
- Description
- Specification
- Application
Acceptable in an industrial setting
With its IP67-rated industrial case, 4-port 10/100/1000T 802.3at PoE, 2-port 10/100/1000T, and static Layer 3 routing, the PLANET IGS-604HPT-M12 Industrial Layer 2+ Managed Ethernet Switch offers a high level of immunity against electromagnetic interference and powerful electrical surges that are typically found on plant floors or in curb-side traffic control cabinets. It is simple to mount the IGS-604HPT-M12 on a wall or DIN rail, which takes up less room. The four Gigabit PoE+ ports each have a power capacity of 36 watts, so a total power budget of up to 144 watts can be used concurrently without taking into account the various PoE applications being used. Additionally, it offers small businesses and corporations a quick, secure, and affordable Power over Ethernet network solution for IP security cameras.
Dust- and water-resistant M12 Ethernet connector
The IGS-604HPT-M12 comes with a 4-port IEEE 802.3at PoE+ (Port 3 to Port 6) and 6-port 10/100/1000BASE-T auto-negotiation waterproof and dustproof M12 connector. Each PoE port has a 36-watt PoE output. The M12 connector offers a secure and reliable connection, assures steady Ethernet performance in environments with high vibration and stress, and makes sure it has an IP67 industrial protection grade that can handle humidity, filth, dust, shock, vibrations, heat, and cold.
Environmentally Resistant Architecture
The IGS-604HPT-M12 can function in a temperature range of -40 to 75 degrees C and can shield itself from dust and water infiltration. In any challenging environment, all of these features guarantee the highest level of reliability for mission-critical applications.
High Availability Network System Dual Power Input
To increase system dependability and uptime, the IGS-604HPT-M12 has a robust dual power input system (Dual 48V56V DC) integrated into the customer's automation network. For instance, the hardware failover feature will be enabled immediately to continue powering the IGS-604HPT-M12 using DC Power 2 in lieu of DC Power 1 without any interruption to operation.
Gigabit Ethernet PoE Networking with Centralized Power Management
The IGS-604HPT-M12 has high-performance Gigabit IEEE 802.3at PoE+ (up to 36 watts) on all ports to meet the demands of greater power necessary PoE network applications with Gigabit speed transmission. It flawlessly satisfies the power needs of PoE VoIP phones, PoE Wireless APs, and all varieties of PoE IP cameras, including IR, PTZ, speed dome cameras, and even box-style IP cameras with an integrated fan and heater for high power consumption. Because there are no longer any limitations on where network devices can be placed near power outlets, the IGS-604HPT-M12's PoE features also assist in lowering deployment costs. Power and data switching are combined into a single device that is managed centrally and delivered via a single connection. Thus, it eliminates the need for extra AC wire and speeds up installation.
Built-in Special PoE Features for Management of Surveillance
The IGS-604HPT-M12 is a managed PoE switch for a surveillance network and has the following clever PoE management features:Scheduled Power Recycling and PD Alive CheckPoE Schedule SMTP/SNMP Trap Event Alert
Alive Check for Intelligent Powered Device
The IGS-604HPT-M12 can be set up to use ping action to continuously track the status of a connected PD (Powered Device). The IGS-604HPT-M12 will restart the PoE port power and restart the PD after it stops functioning and is not responding, at which point the PD will resume functioning. Through the PoE port resetting the PD's power source, it will considerably improve network reliability while lessening the administrative cost.
Recycled Power on Schedule
Each of the connected PDs may reboot every week at a predetermined time thanks to the IGS-604HPT-M12. As a result, it will lessen the possibility of a buffer overflow-related PD crash.
Alert for SMTP/SNMP Trap Events
Even though the majority of NVR or camera management software provides SMTP email alert functionality, the IGS-604HPT-M12 also offers event alert functionality to aid in the diagnosis of abnormal devices due to network connection loss, PoE power loss, or a device rebooting in response to the PD Alive Check process.
Schedule of Energy for PoE
The IGS-604HPT-M12 can be used to establish any PoE network, including VoIP and wireless LAN, in addition to IP surveillance. The IGS-604HPT-M12 can effectively control the power supply in line with the global trend of energy conservation and contribute to the protection of the environment on Earth. It also has the capacity to deliver high power. The "PoE schedule" function, a potent tool for SMBs and corporations to conserve money and energy, enables or disables PoE power feeding for each PoE port during predetermined time intervals.
Fast Recovery for Critical Network Applications with Redundant Ring
To avoid disruptions and outside intrusions, the IGS-604HPT-M12 utilizes redundant ring technology and has a powerful, quick self-recovery capability. To increase system dependability and uptime in challenging factory conditions, it integrates modern ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system. The recovery time of a data link in a certain, straightforward Ring network can be as quick as 20ms.
Dual IPv6/IPv4 Stack
The IGS-604HPT-M12 supports both IPv6 and IPv4 protocols, making it possible for data centers, campuses, telecommunications, and other organizations to transition to the IPv6 era with the least amount of financial outlay. This is because existing network infrastructure may be used with an IPv6 FTTx edge network.
Dependable Layer 2 features
Advanced switch management features like dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control, and IGMP/MLD Snooping can be programmed into the IGS-604HPT-M12. The IGS-604HPT-M12 enables the operation of a high-speed trunk to combine with multiple fiber ports and facilitates fail-over via link aggregation of supporting ports.
Purchase Information
Industrial 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch, IGS-604HPT-M12, Rated IP67 (-40 to 75 degrees C)
Accessories
8-Pin A-Coding M12 Male to RJ45 Ethernet Cable, CB-M12A8MRJ-200, 2 meters
Hardware Specifications | |
---|---|
Copper Ports | 6 x M12, 8-pin A-Coded female connector, 10/100/1000BASE-T auto-MDI/MDI-X ports |
PoE Injector Port | 4 ports with 802.3at/af PoE injector function (Port-3 to Port-6) |
Power Connector | 1 x M12, 5-pin A-Coded male connector |
Switch Architecture | Store-and-Forward |
Switch Fabric | 12Gbps/non-blocking |
Throughput | 8.9Mpps@64bytes |
Address Table | 8K entries, automatic source address learning and aging |
Shared Data Buffer | 4M bits |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Jumbo Frame | 9K bytes |
Dimensions (W x D x H) | 103 x 68.2 x 163 mm |
Weight | 1069g |
Enclosure | IP67 aluminum case |
Installation | Wall-mount kit and DIN rail kit |
LED | System: PWR1 (Green), PWR2 (Green), Fault ( Red ) Ring (Green), R.O. (Green) 10/100/1000T RJ45 Interfaces (Port 1 to Port 2): LNK/ACT (Green) 10/100/1000T RJ45 Interfaces (Port 3 to Port 6): LNK/ACT (Green) PoE-in-Use (Orange) |
Power Consumption | Max. 165.3 watts/563.7 BTU |
Power Requirements | Dual 48~56V DC (>53V DC for PoE+ output recommended) |
ESD Protection | 6KV DC |
Power over Ethernet | |
PoE Standard | IEEE 802.3af/802.3at PoE/PSE |
PoE Power Supply Type | End-span |
PoE Power Output | IEEE 802.3af Standard - Per port 48V~53V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard - Per port 53V~56V DC (depending on the power supply), max. 36 watts |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Budget | 144 watts max. (depending on power input) |
PoE Ability | PD @ 7 watts: 4 units PD @ 15.4 watts: 4 units PD @ 30.8 watts: 4 units |
Layer 2 Management Functions | |
Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable |
Port Status | Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status |
Port Mirroring | TX/RX/Both Many-to-1 monitor |
VLAN | 802.1Q tagged based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs |
Link Aggregation | IEEE 802.3ad LACP/static trunk 3 groups with 2 ports per trunk |
Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) |
QoS | Traffic classification based strict priority and WRR 8-level priority for switching: - Port number - 802.1p priority - 802.1Q VLAN tagging - DSCP/ToS field in IP packet |
IGMP Snooping | IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP querier mode support |
MLD Snooping | MLD (v1/v2) snooping, up to 255 multicast groups MLD querier mode support |
Access Control List | IP-based ACL/MAC-based ACL Up to 256 entries |
Bandwidth Control | Per port bandwidth control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps |
Layer 3 Functions | |
IP Interfaces | Max. 8 VLAN interfaces |
Routing Table | Max. 32 routing entries |
Routing Protocols | IPv4 software static routing IPv6 software static routing |
Management | |
Basic Management Interfaces | Telnet; Web browser; SNMP v1, v2c |
Secure Management Interfaces | SSH/SSL, SNMP v3 |
SNMP MIBs | RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP Power over Ethernet MIB |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC 60068-2-32 (free fall) IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) |
Railway Traffic | *EN50155 |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3az EEE (Energy Efficient Ethernet) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) |
Environment | |
Operating | Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -40 ~ 80 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Standard Accessories | |
Packet Contents | 1 x 8-pin A-code M12-to-RJ45 UTP cable, 2m 1 x M12 5-pin A-coded female connector power cable, 1.2m 1 x Wall-mount kit 1 x DIN-rail kit 1 x Quick Installation Guide 6 x M12 Female Dust Cap 1 x M12 Power Waterproof Cap |
Surveillance System High Availability Networking Solution
Strong, quick self-recovery capabilities allow the IGS-604HPT-M12 to stop disruptions and outside intrusions. To increase system dependability and uptime, it integrates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) into the automation network of the customer. The IGS-604HPT-M12 is the best option for surveillance systems to establish high bandwidth for public transmission systems and railway transmission while also establishing redundant connections.
Application of Layer 3 VLAN Routing with PoE
The IGS-604HPT-M12 guarantees dependable routing between VLANs and network segments thanks to the integrated, powerful Layer 3 routing protocols. By using a VLAN interface with up to 32 routing entries, routing protocols can be deployed. The IGS-604HPT-M12 delivers higher security, greater control, bandwidth conservation, and high-speed uplink, making it unquestionably the best option for industries.
Purchase Information
Industrial 4-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T Managed Ethernet Switch, IGS-604HPT-M12, Rated IP67 (-40 to 75 degrees C)
Accessories
8-Pin A-Coding M12 Male to RJ45 Ethernet Cable, CB-M12A8MRJ-200, 2 meters