Hardware Specifications | |
---|---|
Copper Ports | 6 x M12, 8-pin A-coded female connector, 10/100/1000BASE-T auto-MDI/MDI-X ports |
Power Connector | 1 x M12, 5-pin A-coded male connector |
Switch Architecture | Store-and-Forward |
Switch Fabric | 12Gbps/non-blocking |
Throughput | 8.9Mpps@64bytes |
Address Table | 8K entries, automatic source address learning and aging |
Shared Data Buffer | 4M bits |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Jumbo Frame | 9K bytes |
Dimensions (W x D x H) | 103 x 68.2 x 163 mm |
Weight | 1069g |
Enclosure | IP67 aluminum case |
Installation | Wall-mount kit and DIN-rail kit |
LED | System: PWR1 (Green), PWR2 (Green), Fault ( Red ) Ring (Green), R.O. (Green) 10/100/1000T RJ45 Interfaces LNK/ACT (Green) |
Power Consumption | Max. 8.2 watts / 28.1 BTU |
Power Requirements | Dual 9~48V DC, 24V AC |
ESD Protection | 6KV DC |
Layer 2 Management Functions | |
Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable |
Port Status | Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status |
Port Mirroring | TX/RX/Both Many-to-1 monitor |
VLAN | 802.1Q tagged-based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs |
Link Aggregation | IEEE 802.3ad LACP/static trunk 3 groups with 2 ports per trunk |
Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) |
QoS | Traffic classification based, strict priority and WRR 8-level priority for switching: - Port number - 802.1p priority - 802.1Q VLAN tagging - DSCP/ToS field in IP packet |
IGMP Snooping | IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP querier mode support |
MLD Snooping | MLD (v1/v2) snooping, up to 255 multicast groups MLD querier mode support |
Access Control List | IP-based ACL/MAC-based ACL Up to 256 entries |
Bandwidth Control | Per port bandwidth control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps |
Layer 3 Functions | |
IP Interfaces | Max. 8 VLAN interfaces |
Routing Table | Max. 32 routing entries |
Routing Protocols | IPv4 software static routing IPv6 software static routing |
Management | |
Basic Management Interfaces | Telnet; Web browser; SNMP v1, v2c |
Secure Management Interfaces | SSH/SSL, SNMP v3 |
SNMP MIBs | RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3az EEE (Energy Efficient Ethernet) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 RFC 3810 MLD v2 ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) |
Environment | |
Operating | Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -40 ~ 80 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Standard Accessories | |
Packet Contents | 1 x 8-pin A-code M12-to-RJ45 UTP cable, 2m 1 x M12 5-pin A-coded female connector power cable, 1.2m 1 x Wall-mount kit 1 x DIN-rail kit 1 x Quick Installation Guide 6 x M12 Female Dust Cap 1 x M12 Power Waterproof Cap |
Search Products
Search Products
IGS-5227-6MT
IP67-rated aluminum case
Redundant power design
Supports Ethernet ESD protection of 6000V DC
-40 to 75 degrees C operating temperature
- Description
- Specification
- Application
Strong Enough to Resist Harm for Smooth Operation
With its IP67-rated industrial case, 6 ports 10/100/1000T, and static Layer 3 routing, the PLANET IGS-5227-6MT Industrial Managed Ethernet Switch offers a high level of immunity against electromagnetic interference and strong electrical surges that are typically found on plant floors or in curb-side traffic control cabinets. It is simple to mount the IGS-5227-6MT on a wall or DIN rail, which takes up less room. It offers small businesses and corporations an efficient, secure, affordable, and high-performance Ethernet network solution for IP security surveillance.
Dust- and water-resistant M12 Ethernet connector
A 6-port 10/100/1000BASE-T auto-negotiation waterproof and dustproof M12 connector is included with the IGS-5227-6MT. The M12 connector offers a secure and reliable connection that ensures stable Ethernet functioning under conditions of extreme vibration and shock. It has an IP67 rating for industrial protection, making it resistant to moisture, mud, dust, shock, vibrations, heat, and cold.
Environmentally Resistant Architecture
The IGS-5227-6MT can function in a temperature range of -40 to 75 degrees C and can shield itself from dust and water infiltration. In any challenging environment, all of these features guarantee the highest level of reliability for mission-critical applications.
High Availability Network System Dual Power Input
To increase system dependability and uptime, the IGS-5227-6MT has a robust dual power input system (Dual 9V48V DC, 24V AC) integrated into the customer's automation network. For instance, the hardware failover capability will be enabled immediately to continue powering the IGS-5227-6MT using DC Power 2 in lieu of DC Power 1 without any interruption to operation.
Alert for SMTP/SNMP Trap Events
The IGS-5227-6MT additionally gives event alert capability to aid identify the abnormal device due to whether there is a break in the network connection or loss of power, even if the majority of NVR or camera management software includes SMTP email alert function.
With Fast Recovery for Essential Network Applications
The Switch has robust, quick self-recovery capabilities and offers redundant ring technology to guard against interruptions and outside intrusions. To increase system dependability and uptime in challenging factory conditions, it integrates modern ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system. The recovery time of a data link in a certain, straightforward Ring network can be as quick as 20ms.
Dual IPv6/IPv4 Stack
Data centers, campuses, telecommunications, and other organizations can experience the IPv6 era with the least amount of expenditure thanks to the IGS-5227-6MT's support for both IPv6 and IPv4 protocols. This is because its network facilities do not need to be replaced or upgraded if an IPv6 FTTx edge network is set up.
Layer 3 VLAN Routing for Secure and Flexible Management using IPv4 and IPv6
The IGS-5227-6MT offers Layer 3 IPv4/IPv6 VLAN routing, which enables the crossing of different VLANs and different IP addresses for the purpose of having a highly-secure, flexibly-managed, and straightforward networking application. It also offers ultra high transmission performance, excellent Layer 2 and Layer 4 technologies.
Dependable Layer 2 features
Advanced switch management features like dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control, and IGMP/MLD Snooping can be programmed into the IGS-5227-6MT. The IGS-5227-6MT facilitates fail-over and the operation of a high-speed trunk in combination with multiple fiber ports via link aggregation of supporting ports.
Strong Security
For implementing security at the edge, the IGS-5227-6MT provides a thorough Layer 2 to Layer 4 Access Control List (ACL). By rejecting packets based on source and destination IP addresses, TCP/UDP ports, or predefined standard network applications, it can be used to limit network access. Along with these other security features, it also has 802.1X user, device, and MAC-based authentication. To protect user privacy, communication between edge ports can be stopped using the private VLAN capability. ARP packets with invalid MAC addresses are discarded by the IGS-5227-6MT's DHCP spying, IP Source Guard, and Dynamic ARP Inspection functionalities, which guard against IP spying attacks. The time and effort required by network managers to build highly secure business networks has significantly decreased.
Outstanding Traffic Control
Powerful traffic control and QoS capabilities are abundant on the IGS-5227-6MT, enhancing connection services provided by telecommunications and ISPs. The QoS feature provides wire-speed Layer 4 traffic classifiers and bandwidth limitations that are very helpful for applications used by multi-tenant buildings, multi-business buildings, telecommunications companies, and network service providers. Additionally, it enables the business environment to fully utilize the constrained network resources and ensures the finest transmission quality for VoIP and video conferencing.
Secure and Effective Management
The IGS-5227-6MT L2+ Managed Switch delivers an intuitive, platform-independent management and configuration facility that incorporates Web and SNMP management interfaces thanks to an integrated Web-based management interface. Any management program that adheres to the SNMP Protocol standard can manage the SNMP. It gives Cisco-like commands via Telnet, so the customer does not need to learn new console commands, which cuts down on product learning time. By enabling SSH, SSL, and SNMP v3 connections, which encrypt the packet content during each session, it also provides secure remote management.
For Industrial Computing Networks, 1588 Time Protocol
The IGS-5227 series supports MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet, making it the perfect choice for telecom and carrier Ethernet applications.
Flexible Network Connectivity for Factory Automation is provided through Modbus TCP.
The IGS-5227 series can readily connect with SCADA systems, HMI systems, and other data acquisition systems in factory floors thanks to the Modbus TCP/IP protocol that is supported. It enables administrators to quickly improve factory monitoring and maintenance by remotely monitoring the operating data, port information, and communication status of the industrial Ethernet switch.
Ordering Information
IGS-5227-6MT Industrial IP67-rated 6-Port 10/100/1000T M12 Managed Ethernet Switch (-40~75 degrees C, A-coded M12)
Accessories
CB-M12A8MRJ-200 8-Pin A-Coded M12 male to RJ45 Ethernet Cable, 2 meters
Surveillance System High Availability Networking Solution
In the event of disruptions or outside interference, the Switch has the potential to quickly recover. The ITU-T G.8032 ERPS can significantly increase the network's dependability and uptime. Therefore, the IGS-5227-6MT is perfect for creating an IP-based surveillance infrastructure in public transportation due to its redundant connection and high bandwidth.
Static Layer 2+ VLAN Routing
The IGS-5227-6MT enables dependable routing between VLANs and network segments thanks to the integrated powerful Layer 3 routing protocols. By using a VLAN interface with up to 32 routing entries, routing protocols can be deployed. The IGS-5227-6MT offers better security, control, and bandwidth conservation in addition to high-speed uplink, making it unquestionably the best option for industries.
Purchase Information
Industrial 6-Port 10/100/1000T M12 Managed Ethernet Switch, IP67-rated (-40 to 75 degrees C), IGS-5227-6MT
Accessories
8-Pin A-Coded M12 male to RJ45 Ethernet Cable, CB-M12A8MRJ-200, 2 meters
Related Products
We, Bluboxx Communication, Provides Wide Range Ring Managed Gigabit Ethernet Switches In PAN India.
Our Product Igs-5227-6Mt With Ip67-Rated Aluminum Case Redundant Power Design, Supports Ethernet Esd Protection Of 6000V Dc And -40 To 75 Degrees C Operating Temperature.
We Provide Complete Industrial Networking Solutions In Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, Goa, Gurgaon, Pan India