Hardware Specifications | |
---|---|
Copper Ports | 6 10/100/1000BASE-T waterproof and dustproof RJ45 auto-MDI/MDI-X ports |
Switch Architecture | Store-and-Forward |
Switch Fabric | 12Gbps/non-blocking |
Throughput | 8.9Mpps@64bytes |
Address Table | 8K entries, automatic source address learning and aging |
Shared Data Buffer | 4M bits |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Jumbo Frame | 9K bytes |
Reset Button | < 5 sec: System reboot > 5 sec: Factory default |
Dimensions (W x D x H) | 103 x 68.3 x 163 mm |
Weight | 1069g |
LED | System: DC1 (Green), DC2 (Green), Fault ( Red ) Ring (Green), R.O. (Green) 10/100/1000T RJ45 Interfaces: LNK/ACT (Green) |
Power Consumption | Max. 8.3 watts / 28.5 BTU |
Power Requirements | Dual 9~48V DC, 24V AC |
ESD Protection | 6KV DC |
Layer 2 Management Functions | |
Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable |
Port Status | Display each port’s speed duplex mode, link status, flow control status, auto-negotiation status, trunk status |
Port Mirroring | TX/RX/Both Many-to-1 monitor |
VLAN | 802.1Q tagged based VLAN Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN IP Subnet-based VLAN MVR (Multicast VLAN registration) Up to 255 VLAN groups, out of 4095 VLAN IDs |
Link Aggregation | IEEE 802.3ad LACP/static trunk 3 groups with 2 port per trunk |
Spanning Tree Protocol | IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) |
QoS | Traffic classification based, Strict priority and WRR 8-level priority for switching: - Port number - 802.1p priority - 802.1Q VLAN tag - DSCP/ToS field in IP packet |
IGMP Snooping | IGMP snooping v1, v2, v3, up to 255 multicast groups IGMP querier mode support |
MLD Snooping | MLD snooping v1, v2, up to 255 multicast groups MLD querier mode support |
Access Control List | IP-based ACL/MAC-based ACL Up to 256 entries |
Bandwidth Control | Per port bandwidth control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps |
Layer 3 Functions | |
IP Interfaces | Max. 8 VLAN interfaces |
Routing Table | Max. 32 routing entries |
Routing Protocols | IPv4 software static routing IPv6 software static routing |
Management | |
Basic Management Interfaces | Telnet/Web browser/SNMP v1, v2c |
Secure Management Interfaces | SSH, SSL, SNMP v3 |
SNMP MIBs | RFC 1213 MIB-II RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2819 RMON MIB (Group 1, 2, 3 and 9) RFC 2737 Entity MIB RFC 2618 RADIUS Client MIB RFC 2863 IF-MIB RFC 2933 IGMP-STD-MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP v3 RFC 2710 MLD v1 FRC 3810 MLD v2 |
Environment | |
Operating | Temperature: -40 ~ 75 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Storage | Temperature: -40 ~ 80 degrees C Relative Humidity: 5 ~ 95% (non-condensing) |
Search Products
Search Products
IGS-5227-6T
IP67-rated aluminum case
Redundant power design
Supports Ethernet ESD protection of 6000V DC
-40 to 75 degrees C operating temperature
- Description
- Specification
- Application
No impact of industrial conditions on performance
With its IP67-rated industrial case, 6 ports 10/100/1000T, and static Layer 3 routing, the PLANET IGS-5227-6T Industrial Managed Ethernet Switch offers a high level of immunity against electromagnetic interference and powerful electrical surges that are typically found on plant floors or in curb-side traffic control cabinets. It is simple to mount the IGS-5227-6T on a wall or DIN rail, which takes up less room. It offers small businesses and enterprises an immediate, secure, economical, and high-performance network solution for IP security surveillance.
Dust- and water-resistant RJ45 Ethernet connector with shielded plug
A 6-port 10/100/1000BASE-T auto-negotiation waterproof and dustproof RJ45 connector is included with the IGS-5227-6T. The standard UTP cable can become waterproof and dustproof by using these shielded RJ45 plugs. It offers a tight and secure connection and has an IP67 industrial protection rating, which means it can withstand humidity, dirt, dust, shock, vibrations, heat, and cold. It connects to an RJ45 waterproof and dustproof connector.
Environmentally Resistant Architecture
The IGS-5227-6T can operate between -40 and 75 degrees C and can shield itself from dust and water infiltration. In any challenging environment, all of these features guarantee the highest level of reliability for mission-critical applications.
High Availability Network System Dual Power Input
To increase system dependability and uptime, the IGS-5227-6T has a robust dual power input system (Dual 948V DC, 24V AC) integrated into the customer's automation network. For instance, the hardware failover function will be activated automatically to continue powering the IGS-5227-6T via DC Power 2 in lieu of DC Power 1 without any interruption to operation.
Alert for SMTP/SNMP Trap Events
Although the majority of NVR or camera management software provides SMTP email alert functionality, the IGS-5227-6T also offers event alert functionality to assist in diagnosing any abnormal devices caused by network connection failure or power outages.
With Fast Recovery for Essential Network Applications
To stop interruptions and outside intrusions, the IGS-5227-6T supports redundant ring technology and has a powerful, quick self-recovery capability. To increase system reliability and uptime in challenging factory environments, it integrates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system. The recovery time of a data link in a specific, straightforward Ring network is 20 ms or less.
Dual IPv6/IPv4 Stack
Data centers, campuses, telecoms, and other organizations can experience the IPv6 era with the least amount of investment thanks to the IGS-5227-6T's support for both IPv6 and IPv4 protocols. This is because its network facilities do not need to be replaced or upgraded if an IPv6 FTTx edge network is set up.
Layer 3 VLAN Routing for Secure and Flexible Management using IPv4 and IPv6
The Layer 3 IPv4/IPv6 VLAN routing feature of the IGS-5227-6T enables the crossing of different VLANs and different IP addresses for the purpose of having a highly-secure, flexibly-managed, and straightforward networking application in addition to providing ultra high transmission performance and excellent Layer 2 and Layer 4 technologies.
Dependable Layer 2 features
Advanced switch management features like dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control, and IGMP/MLD Snooping can be programmed into the IGS-5227-6T. The IGS-5227-6T enables the operation of a high-speed trunk to combine with numerous fiber ports and supports fail-over via link aggregation of supporting ports.
Strong Security
For enforcing security at the edge, the Switch provides a comprehensive Layer 2 to Layer 4 Access Control List (ACL). By rejecting packets based on source and destination IP addresses, TCP/UDP ports, or predefined standard network applications, it can be used to limit network access. Along with these other security features, it also has 802.1X user, device, and MAC-based authentication. To protect user privacy, communication between edge ports can be stopped using the private VLAN function. ARP packets with invalid MAC addresses are discarded by the IGS-5227-6T's DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection functions, which guard against IP snooping attacks. The time and effort required by network administrators to build highly secure corporate networks has significantly decreased.
Outstanding Traffic Control
Powerful traffic management and QoS features are abundant on the IGS-5227-6T, enhancing connection services provided by telecoms and ISPs. Wire-speed Layer 4 traffic classifiers and bandwidth limits are two of the QoS features that are especially beneficial for applications used by multi-tenant buildings, multi-business buildings, telecommunications companies, and network service providers. Additionally, it enables the business environment to fully utilize the constrained network resources and ensures the best transmission quality for VoIP and video conferencing.
Secure and Effective Management
The IGS-5227-6T L2+ Managed Switch offers an intuitive, platform-independent management and configuration facility that includes Web and SNMP management interfaces thanks to an integrated Web-based management interface. Any management program that adheres to the SNMP Protocol standard can manage the SNMP. It offers Cisco-like commands via Telnet, so the customer does not need to learn new console commands, which cuts down on product learning time. By supporting SSH, SSL, and SNMP v3 connections, which encrypt the packet content at each session, it also provides secure remote management.
For Industrial Computing Networks, 1588 Time Protocol
The IGS-5227 series supports MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet, making it the perfect choice for telecom and carrier Ethernet applications.
Flexible Network Connectivity for Factory Automation is provided by Modbus TCP.
The IGS-5227 series can easily integrate with SCADA systems, HMI systems, and other data acquisition systems in factory floors thanks to the Modbus TCP/IP protocol that is supported. It enables administrators to easily improve factory monitoring and maintenance by remotely monitoring the operating data, port information, and communication status of the industrial Ethernet switch.
Purchase Information
Industrial 6-Port 10/100/1000T Managed Ethernet Switch, IGS-5227-6T, Rated IP67 (-40 to 75 degrees C)
Datasheet
Surveillance System High Availability Networking Solution
In the event of interruptions or outside interference, the Switch has the ability to quickly recover. The ITU-T G.8032 ERPS can significantly increase the network's dependability and uptime. Therefore, the IGS-5227-6T is perfect for creating an IP-based surveillance infrastructure in public transportation due to its redundant connection and high bandwidth.
Static Layer 2+ VLAN Routing
The IGS-5227-6T ensures dependable routing between VLANs and network segments thanks to the integrated robust Layer 3 routing protocols. By using a VLAN interface with up to 32 routing entries, routing protocols can be applied. The IGS-5227-6T provides better security, control, and bandwidth conservation, as well as high-speed uplink, making it unquestionably the perfect solution for industries.
Purchase Information
Industrial 6-Port 10/100/1000T Managed Ethernet Switch, IGS-5227-6T, Rated IP67 (-40 to 75 degrees C)
Related Products
We Bluboxx Communications Provides Wide Range Ring Managed Gigabit Ethernet Switches.
Our Product Igs-604Hpt-M12, Complies With IEEE 802.3At Power Over Ethernet Plus End-Span PSE And IEEE 802.3Af Power Over Ethernet End-Span PSE Up To 4 Ports Of IEEE 802.3Af/802.3At Devices Powered, Supports Poe Power Up To 36 Watts For Each Poe Port. We Provide Complete Industrial Networking Solutions In Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, Goa, Gurgaon, Pan India