Search Products


WGS-4215-16P2S

  • 16-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ Injector function
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • Supports -10 to 60 degrees C operating temperature
  • Supports ESD 6KV DC Ethernet protection
  • Description
  • Specification
  • Application

Expanded and Simple to Deploy Network

The PLANET WGS-4215-16P2S is a cutting-edge Industrial 16-port 10/100/1000T 802.3at PoE + 2-port 100/1000X SFP Wall-mounted Managed Switch that features IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, and a user-friendly interface. It can also be mounted on a wall in any convenient location. The WGS-4215-16P2S can function consistently, steadily, and silently in any setting without compromising its performance. The WGS-4215-16P2S is a perfect solution to meet the demand for the following network applications, with a total power budget of up to 240 watts for various PoE applications, ultra networking speed, and an operating temperature range of -10 to 60 degrees C in a flatbut rugged IP40 metal housing.

  • Home and building automation network
  • IoT, or the internet of things
  • IP monitoring
  • LAN wireless

 

Built-in Special PoE Features for Managed Powered Devices

The WGS-4215-16P2S has the following unique PoE management features since it is the managed PoE switch for surveillance, WLAN, and VoIP networks:

Check for PD life

periodic power recycling

PoE timetable

PoE use analysis

Alive Check for Intelligent Powered Device

The WGS-4215-16P2S can be set up to use ping action to continuously track the status of connected PDs (powered devices). The WGS-4215-16P2S will restart the PoE port power and restart the PD when it stops operating and responding, restoring its functionality. Through the PoE port's capacity to reset the PD's power source and lessen the administrative workload, it will significantly improve network dependability.


Recycled Power on Schedule

Each of the connected PoE IP cameras or PoE wireless access points can reboot on a weekly schedule thanks to the WGS-4215-16P2S. As a result, it will lessen the likelihood that a buffer overflow may cause an IP camera or AP to crash.

PoE Schedule for Energy Saving

Under the trend of energy saving worldwide and contributing to environmental protection, the WGS-4215-16P2S can effectively control the power supply besides its capability of giving high watts power. The “PoE schedule” function helps you to enable or disable PoE power feeding for each PoE port during specified time intervals and it is a powerful function to help SMBs or enterprises save power and budget. It also increases security by powering off PDs that should not be in use during non-business hours.

Contemporary Wall-mount Installation

The WGS-4215-16P2S is specifically made to be put in a small space, like an electrical box or wall enclosure. Any place with limited room may readily accommodate the small, flat, and wall-mounted design. It uses the "Front Access" design, which makes it simple for personnel to install, wire cables, monitor LEDs, and maintain the WGS-4215-16P2S when it is enclosed. The WGS-4215-16P2S's versatility in use is increased by the possibility of fixed wall mounting, magnetic wall mounting, or DIN rail installation.

Environmentally Resistant Architecture

The WGS-4215-16P2S offers a high level of immunity to electromagnetic interference and strong electrical surges, which are typically encountered on plant floors or in curb-side traffic control cabinets without air conditioning, thanks to IP40, flat but sturdy metal housing protection. The WGS-4215-16P2S may be used in practically any challenging environment because it can function in a temperature range of -10 to 60 degrees C.

Dual Stack IPv6/IPv4 Management

The WGS-4215-16P2S, which supports both IPv6 and IPv4 protocols, enables SMBs to enter the IPv6 era with the least amount of investment because its network infrastructure does not need to be changed or upgraded if an IPv6 FTTx edge network is put up.

 

Dependable Layer 2 features

Advanced switch management features like dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping can be programmed into the WGS-4215-16P2S. The WGS-4215-16P2S offers fail-over and the operation of a high-speed trunk in combination with many ports, such as a 4Gbps fat pipe, via link aggregation. Also incorporated is the Layer 2 protocol known as Link Layer Discovery Protocol (LLDP), which aids in learning the fundamentals of nearby devices on the local broadcast domain.

Effective Traffic Management

Strong QoS features and effective traffic management are abundant in the WGS-4215-16P2S, enhancing services for enterprise-class data, phone, and video solutions. The capability includes 802.1p/CoS/IP DSCP QoS priority, remarking, per port bandwidth control, broadcast/multicast/unicast storm control, and 802.1p/CoS/IP DSCP QoS priority. It ensures the finest VoIP and video stream transmission performance and gives businesses the ability to fully utilize the constrained network resources.

An approachable and secure management

The WGS-4215-16P2S has SNMP, Telnet, and online administration interfaces for effective management. The WGS-4215-16P2S provides an easy-to-use, platform-independent management and configuration facility with its integrated web-based management interface. The switch may be managed using any common management software because it supports the SNMP standard. Telnet can be used to connect to the switch for text-based management. Additionally, by supporting SSH, SSL, and SNMP v3 connections, which encrypt the packet content during each session, the WGS-4215-16P2S provides secure remote management.


Purchase Information

Industrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-Mounted Managed Switch (-10 to 60 degrees C), model number WGS-4215-16P2S.

Hardware Specifications
Copper Ports16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots2 1000BASE-SX/LX/BX SFP interfaces(Port-17 to Port-18)
Compatible with 100BASE-FX SFP
PoE Injector Port16 ports with 802.3at/af PoE injector function with Port-1 to Port-16
Switch ArchitectureStore-and-Forward
Switch Fabric36Gbps/non-blocking
Switch Throughput@64 bytes26.78Mpps @64 bytes
MAC Address Table8K entries
Shared Data Buffer4.1 megabits
Flow ControlIEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame10Kbytes
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
LEDPower LED:
 Power (Green)
PoE Port (Port-1 to Port-16):
 PoE-in-Use (Orange)
 LNK/ACT (Green)
100/1000X SFP Ports (Port 17 to Port 18):
 1000 LNK/ACT (Green)
 100 LNK/ACT (Orange)
Power Connector■ Removable 3-pin terminal block for power input
 - Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
 - Pin 3 for earth ground
■ DC power jack with 2.1mm central pole
Power Requirements *48~56V DC, 6A (max.)
Power Consumption/ DissipationMax. 253 watts/868 BTU
Dimensions (W x D x H)245 x 140 x 24.4 mm
Weight1004g
ESD ProtectionContact Discharge 6KV DC
Air Discharge 8KV DC
EnclosureIP40 metal case
InstallationFixed wall mount, magnetic wall mount or DIN rail
Power over Ethernet
PoE StandardIEEE 802.3af/802.3at Power over Ethernet PSE
PoE Power Supply TypeEnd-span
PoE Power OutputIEEE 802.3af Standard
 - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
 - Per port 51V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget240 watts (depending on power input)
Max. Number of Class 2 PDs16
Max. Number of Class 3 PDs16
Max. Number of Class 4 PDs9
Layer 2 Functions
Port MirroringTX/RX/Both
Many-to-1 monitor
VLAN802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Management VLAN
Link AggregationIEEE 802.3ad LACP and static trunk
Supports 1 groups with 2 SFP ports per trunk
Spanning Tree ProtocolIEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
STP BPDU guard, BPDU filtering and BPDU forwarding
IGMP SnoopingIPv4 IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups
MLD SnoopingIPv6 MLD (v1/v2) snooping, up to 256 multicast groups
Access Control ListIPv4/IPv6 IP-based ACL/MAC-based ACL
IPv4/IPv6 IP-based ACE/MAC-based ACE
QoS8 mapping IDs to 8 level priority queues
 - Port Number
 - 802.1p priority
 - DSCP/IP precedence of IPv4/IPv6 packets
Traffic classification based, strict priority and WRR
Ingress/Egress Rate Limit per port bandwidth control
SecurityIEEE 802.1X port-based authentication
Built-in RADIUS client to cooperate with RADIUS server
RADIUS/TACACS+ authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
Storm control support
Broadcast/Unknown unicast/Unknown multicast
Management Functions
Basic Management InterfacesWeb browser
Telnet
SNMP v1, v2c
Secure Management InterfacesSSH, SSL, SNMP v3
System ManagementFirmware upgrade by HTTP/TFTP protocol through Ethernet network
Configuration upload/download through HTTP/TFTP
Remote/Local Syslog
System log
LLDP protocol
SNTP
PLANET Smart Discovery Utility
SNMP MIBsRFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (version 2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIB
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
Environment
OperatingTemperature: -10 ~ 60 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Accessories
Standard Accessories■ Quick Installation Guide x 1
■ 3-pin Terminal Block Connector x 1
■ Wall-mounted Kit x 1
■ DIN-rail Kit x 1
■ Magnet Kit x 1
■ RJ45 Dust Cap x 16
■ SFP Dust Cap x 2
*Remark:The two power input interfaces don’t support power redundant function

 

Building Security Automation Switch

The WGS-4215-16P2S Industrial Wall-mount Managed Switch provides a comprehensive Layer 2 to Layer 4 Access Control List (ACL), making it ideal for facilities where security must be carefully maintained. By rejecting packets based on source and destination IP addresses, TCP/UDP ports, or predefined standard network applications, the switch can impose restrictions on network access. A carefully controlled network can be quickly and readily obtained with the WGS-4215-16P2S.

The ideal solution for integrating an IP PoE camera and NVR system

The WGS-4215-16P2S has 16 10/100/1000Mbps 802.3at PoE ports, each of which can simultaneously supply 16 PoE IP cameras with electricity. The WGS-4215-16P2S can also connect to a core fiber switch and provide video streams to an NVR and monitoring station using its two 100/1000BASE-X SFP connections. The WGS-4215-16P2S enables the recorded video files from the 8 PoE IP cameras to be saved in the NVR systems using the high-performance switch architecture. Additionally, the NVR systems may be managed and watched over both locally (through LAN) and remotely (via Internet). Unquestionably, the WGS-4215-16P2S offers a perfect secure surveillance system at a cheaper overall cost.

 

Purchase Information

Industrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-Mounted Managed Switch (-10 to 60 degrees C), model number WGS-4215-16P2S.