Search Products


Wgs-804hpt

  • 8-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ Injector function
  • 2 100/1000BASE-X mini-GBIC/SFP slots
  • Supports -40 to 75 degrees C operating temperature
  • Supports ESD 8KV DC Ethernet protection
  • Description
  • Specification
  • Application

Expanded and Easily Deployed Network

The PLANET wgs-804hpt is a cutting-edge Industrial 8-port 10/100/1000T 802.3at PoE + 2-port 100/1000X SFP Wall-mounted Managed Switch that features IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, and a user-friendly interface. It can be mounted on a wall in any convenient location or installed in a wall enclosure. In every situation, the WGS-4215-8P2S can function dependably, steadily, and silently without suffering performance loss. The WGS-4215-8P2S is a perfect solution to meet the demand for the following network applications, with a total power budget of up to 200 watts for various PoE applications, ultra networking speed, and an operating temperature range of -40 to 75 degrees C in a small but durable IP30 metal housing.

  • Network for home or building automation
  • IoT (Internet of Things) surveillance
  • A wireless LAN

Integrated Special PoE Features for Powered Devices Management

The WGS-4215-8P2S comes equipped with the following unique PoE management features since it is the managed PoE switch for WLAN, VoIP, and surveillance networks:

  • Alive check for PD
  • routine power recycling
  • Intelligent Powered Device Alive Check PoE scheduling PoE consumption monitoring

The linked PD (Powered Device) status of the WGS-4215-8P2S can be configured to be tracked in real time using ping action. The WGS-4215-8P2S will restart the PoE port power and restore the PD's functionality after it stops operating and responding. Through the PoE port resetting the PD's power source and easing administrator administration duties, it will significantly improve network dependability.

 


Power Recycling on Schedule

Every PoE IP camera or PoE wireless access point connected to the WGS-4215-8P2S can reboot at a predetermined time each week. As a result, it will lessen the possibility of an IP camera or AP crash brought on by a buffer overflow.

 

 

Energy-saving PoE Schedule

The WGS-4215-8P2S, in addition to being able to provide high watts of power, can effectively control the power supply in line with the global trend of energy conservation and contribute to environmental protection. The "PoE schedule" function, which is effective in assisting SMBs or enterprises in saving money and energy, enables or disables PoE power feeding for each PoE port during predetermined time intervals. Additionally, it improves security by turning off PDs that shouldn't be used outside of work hours.

Cutting-edge Wall-mount Installation

The WGS-4215-8P2S is uniquely made to be fitted in a small space, like a wall enclosure or an electrical weak box. Any place with limited room may readily accommodate the flat, compact design that is wall-mounted. It uses the user-friendly "Front Access" design, which makes it very simple for personnel to install, cable wire, monitor, and maintain the WGS-4215-8P2S when it is housed in an enclosure. The WGS-4215-8P2S's versatility in use is increased by the fact that it may be mounted on a fixed wall, a magnetic wall, or a DIN rail.

.

Design for Environmental Hardness

The WGS-4215-8P2S offers a high level of immunity to electromagnetic interference and strong electrical surges that are typically encountered on plant floors or in curb-side traffic control cabinets without air conditioners. It does this with IP30, flat but tough metal housing protection. The WGS-4215-8P2S can be used in virtually any challenging environment because it can function in a temperature range of -40 to 75 degrees Celsius.

Dual Stack Management of IPv6 and IPv4

As it supports both IPv6 and IPv4 protocols, the WGS-4215-8P2S enables SMBs to transition to the IPv6 era with the least amount of investment possible because its network infrastructure does not need to be changed or upgraded if an IPv6 FTTx edge network is put up.

Effective Layer 2 Features

The sophisticated switch management features of the WGS-4215-8P2S, including dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping, can be set. The WGS-4215-8P2S offers fail-over in addition to enabling link aggregation, which enables the operation of a high-speed trunk to combine with many ports, such as a 16Gbps fat pipe. Additionally, the Layer 2 protocol Link Layer Discovery Protocol (LLDP) is present to assist in obtaining fundamental details about nearby devices on the local broadcast domain.

Optimal Traffic Management

The WGS-4215-8P2S is equipped with a plethora of strong QoS capabilities and strong traffic management to improve services for enterprise-class data, phone, and video solutions. Broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority, and remarking are among the features. It ensures the finest performance in VoIP and video stream transmission and equips businesses to fully utilize the constrained network resources.

Management that is cordial and secure

The WGS-4215-8P2S has management interfaces for web, Telnet, and SNMP for effective management. The WGS-4215-8P2S comes with an easy-to-use, platform-independent web-based management interface that is built in. The switch can be managed by any standard management program because it supports SNMP. The switch can be accessed through Telnet for text-based management. The WGS-4215-8P2S also provides secure remote management thanks to its support for SSH, SSL, and SNMP v3 connections, which encrypt the packet content at each session.

High-Tech Network Security

For implementing security at the edge, PLANET WGS-4215-8P2S provides an extensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL). Its defense system also includes 802.1X port-based user and device authentication, which can be set up with RADIUS to provide port level security and prevent unauthorized users. User privacy can be ensured by blocking communication between edge ports using the protected port feature. The WGS-4215-8P2S further has DHCP snooping, IP source guard, and dynamic ARP inspection services to guard against IP spying attacks and to discard ARP packets with incorrect MAC addresses. Network managers may now build extremely secure business networks with a lot less time and effort than in the past.

Hardware Specifications
Copper PortsEight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
PoE Inject PortEight with 802.3at PoE+ injector function (Port-1 to Port-8)
SFP/mini-GBIC SlotsTwo 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode
Switch ArchitectureStore-and-Forward
Switch Fabric20Gbps/non-blocking
Switch Throughput@64 bytes14.8Mpps @64 bytes
MAC Address Table8K entries
Shared Data Buffer4.1 megabits
Flow ControlIEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame10KB
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
LED■ Power LED: Power (Green)
■ PoE Port (Port-1 to Port-8):
 PoE-in-Use (Orange)
 LNK/ACT (Green)
■ 100/1000X SFP Ports (Port 9 to Port 10):
 1000 LNK/ACT (Green)
 100 LNK/ACT (Orange)
Connector■ Removable 3-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+/Pin 2: V-)
- Pin 3 for earth ground
■ DC power jack with 2.0mm central pole
Power Requirements48~56V DC, 6A (max.) terminal block power input
48~56V DC, 6A (max.) DC jack power input
Note: The two power input interfaces don’t support power redundant function.
Power Consumption/ DissipationMax. 210 watts/716 BTU
Dimensions (W x D x H)178 x 25 x 134 mm
Weight640g
ESD ProtectionContact Discharge 6KV DC
Air Discharge 8KV DC
EnclosureMetal
InstallationFixed wall mount, magnetic wall mount or DIN rail
Power over Ethernet
PoE StandardIEEE 802.3af/802.3at Power over Ethernet PSE
PoE Power Supply TypeEnd-span
PoE Power Output■ IEEE 802.3af Standard
 - Per port 48V~56V DC (depending on the power supply), max. 15.4
 watts
■ IEEE 802.3at Standard
 - Per port 50V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget200 watts (depending on power input)
Max. Number of Class 2 PDs8
Max. Number of Class 3 PDs8
Max. Number of Class 4 PDs7
Layer 2 Functions
Port MirroringTX/RX/Both
Many-to-1 monitor
VLAN802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Management VLAN
Link AggregationIEEE 802.3ad LACP and static trunk
Supports 1 groups with 2 SFP ports per trunk
Spanning Tree ProtocolIEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
STP BPDU guard, BPDU filtering and BPDU forwarding
IGMP SnoopingIPv4 IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups
MLD SnoopingIPv6 MLD (v1/v2) snooping, up to 256 multicast groups
Access Control ListIPv4/IPv6 IP-based ACL/MAC-based ACL
IPv4/IPv6 IP-based ACE/MAC-based ACE
QoS8 mapping IDs to 8 level priority queues
- Port Number
- 802.1p priority
- DSCP/IP precedence of IPv4/IPv6 packets
Traffic classification based, strict priority and WRR
Ingress/Egress Rate Limit per port bandwidth control
SecurityIEEE 802.1X port-based authentication
Built-in RADIUS client to cooperate with RADIUS server
RADIUS/TACACS+ authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
Storm control support
Broadcast/Unknown unicast/Unknown multicast
Management Functions
Basic Management InterfacesWeb browser; Telnet; SNMP v1, v2c, v3
Firmware upgrade by HTTP/TFTP protocol through Ethernet network
Configuration upload/download through HTTP/TFTP
Remote/Local Syslog
System log
LLDP protocol
SNTP
PLANET Smart Discovery Utility
Secure Management InterfacesSSH, SSL, SNMP v3
SNMP MIBsRFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (version 2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIB
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
Environment
OperatingTemperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -40 ~ 85 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Accessories
Standard Accessories■ Quick Installation Guide x 1
■ 3-pin Terminal Block Connector x 1
■ Wall-mounted Kit x 1
■ DIN-rail Kit x 1
■ Magnet Kit x 1
■ RJ45 Dust Cap x 8
■ SFP Dust Cap x 2

Building Security Automation Switch

The WGS-804HPT Industrial Wall-mount Managed Switch provides a thorough Layer 2 to Layer 4 Access Control List (ACL), making it ideal for facilities where security must be tightly enforced. By rejecting packets based on source and destination IP addresses, TCP/UDP ports, or predefined standard network applications, the switch can impose restrictions on network access. A tightly controlled network can be quickly and readily obtained with the WGS-4215-8P2S.

 


The ideal solution for integrating an IP PoE camera and NVR system
The WGS-4215-8P2S has 8 10/100/1000Mbps 802.3at PoE ports that can simultaneously supply power to 8 PoE IP cameras. The WGS-4215-8P2S can also connect to a core fiber switch and provide video streams to an NVR and monitoring station using its two 100/1000BASE-X SFP connections. The WGS-4215-8P2S enables the recorded video files from the 8 PoE IP cameras to be saved in the NVR systems using the high-performance switch architecture. Additionally, the NVR systems may be managed and watched over both locally (through LAN) and remotely (via Internet). Unquestionably, the WGS-4215-8P2S offers the best secure surveillance system at a reduced overall cost.

 

Switch for Industrial Area Data Collection and Forwarding

With its 8 10/100/1000 Mbps ports, auto MDI/MDIX functionality, 16 Gbps non-blocking switch fabric, and 8 K MAC address table, the WGS-4215-8P2S can transport packets at wire speed without worrying about packet loss. The WGS-4215-8P2S's slim-type IP30 aluminum housing makes it the perfect choice for the majority of harsh industrial applications.

Purchase Information

Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP, WGS-4215-8P2 S Managed Switch Mounted (-40 to 75 degrees C)
Accessories
-10 to 60 degrees Celsius PWR-120-48 120W 48V DC Single Output Industrial DIN-rail Power Supply
Industrial DIN-rail Power Supply, PWR-240-48, 240W, 48V DC, Single Output (-10 to 60 degrees C)
PWR-480-48 Industrial DIN-rail Power Supply, 480W, 48V DC, Single Output (-25 to 70 degrees C)