Search Products


IGTP-80xT Series

  • 1-port 10/100/1000BASE-T RJ45 with IEEE 802.3af /802.3at PoE+ Injector
  • 1 1000BASE-SX/LX SC Fiber interface (IGTP-802T/IGTP-802TS)
  • 1 SFP slot, supporting 1000BASE-X and 100BASE-FX transceiver dual mode (IGTP-805AT)
  • Description
  • Specification
  • Application

The PLANET IGTP-80xT Industrial Gigabit Media Converter combines Ethernet media conversion (from 1000BASE-X to 10/100/1000BASE-T) with an 802.3at Power over Ethernet Plus (PoE+) injector to offer high data transmission speeds and up to 30 watts of power output to PDs (powered devices) installed in a remote location. Its 1000BASE-X fiber optic uplink connector allows for long-distance, high-speed, reliable data transfer to a remote core network. The innovative and useful power system of the IGTP-80xT enables either 12-48V DC power input or 24V AC power input for power redundancy and operational flexibility.

Because of its IP30 rugged casing and temperature operating range of -40 to 75 degrees C, the IGTP-80xT can be used in virtually any demanding situation.

The Range of Network Deployment Is Expanded by Fiber-Optic Link Capability

The maximum distance between a PoE PSE (power supply equipment) and PD through an Ethernet connection is 100 meters. For applications demanding greater distances and to extend the PoE deployment range, the IGTP-80xT features a fiber interface. The IGTP-80xT uses the following fiber connector:

1000BASE-SX multi-mode and transmission distances of up to 550 meters are supported via the IGTP-802T fiber SC connector.
IGTP-802TS: Fiber SC connector with a 10-kilometer single-mode 1000BASE-LX transmission range.
The IGTP-805AT's SFP slot supports 100BASE-FX/1000BASE-X multi/single mode SFP modules and can support transmission distances of up to 120km (depending on the SFP module).
Long fiber distances are still supported by the IGTP-80xT, which also maintains transmission speeds of up to 1000Mbps. It functions using the high-performance Store and Forward method and prevents packet loss with IEEE 802.3x flow control and the LFP (Link Fault Passthrough) feature in the DIP switch design. Additionally, it might provide a trustworthy means to monitor network power usage and immediately notify administrators of issues with the connection medium.

Plug and Play High Power Sourcing Solution

The IGTP-80xT is IEEE 802.3at compliant and provides up to 30 watts of PoE output power, which is twice as much as 802.3af. Additionally, it provides backwards compatibility with 802.3af PoE standards, allowing users to simultaneously deploy low-powered and high-powered devices without the need for software modification. By supplying data and Power over Ethernet from a single unit, the IGTP-80xT can simplify cable deployment and eliminate the need for particular electrical outlets on the wall, ceiling, or any other hard-to-reach area.

Convenient and Reliable Power System

In order to address the power source issue, the IGTP-80xT adopts the 1248V DC to 52V power boost technology. This eliminates the need for special power supplies and makes it possible to use 802.3at power PoE+ with the frequently used 1248V DC power input or 24V AC power input for transportation and industrial-level applications. It can run with additional or backup power inputs in high availability applications anywhere in the world because to its wide range of voltages.

Building Environmentally Resistant Industrial PoE Networks

The IGTP-80xT is specially built with durable components and a sturdy housing shell to operate dependably in electrically demanding and climatically demanding areas, such as plant floors or curbside traffic control cabinets. The IGTP-80xT is packaged in a compact, IP30-rated housing that allows for either DIN-rail or wall mounting in order to maximize cabinet space. Service providers, campuses, and public areas can quickly, simply, and economically deploy PoE wireless access points, IP cameras, or IP phones in any position with the IGTP-80xT. Additionally, it has robust IP30 casing protection. Since it can operate in a wide temperature range, from -40 to 75 degrees Celsius, it may be placed almost anywhere.

Information for purchase

Industrial media converters IGTP-802T 1000BASE-SX to 10/100/1000BASE-T 802.3at PoE+ (SC,MM) -550m and IGTP-802TS 1000BASE-LX to 10/100/1000BASE-T 802.3at PoE+ (SC,SM) -10km are available for purchase.
Industrial Media Converter (mini-GBIC, SFP), IGTP-805AT 1000BASE-SX/LX to 10/100/1000BASE-T 802.3at

Ethernet Interface
Copper10/100/1000BASE-T Ethernet TP interface. Maximum 100m distance.
Auto-negotiation, auto MDI/MDI-X with PoE injector function
1000BASE-X Fiber-optic Connector TypeIGTP-802T: SC
IGTP-802TS: SC
IGTP-805AT: SFP (LC)
Fiber CableIGTP-802T
Multi-mode: 50/125μm or 62.5/125μm optic fiber

IGTP-802TS
Single-mode: 9/125μm optic fiber

IGTP-805AT
Varying on SFP Module
Fiber Cable DistanceIGTP-802T: 220m & 550m
IGTP-802TS: 10km
IGTP-805AT: Varying on SFP Module
Fiber Optical FrequencyIGTP-802T: 850nm
IGTP-802TS: 1310nm
IGTP-805AT: Varying on SFP Module
Launch PowerIGTP-802T
Max. -4dBm
Min. -9.5dBm

IGTP-802TS
Max. -3dBm
Min. -9.5dBm

IGTP-805AT
Varying on SFP Module
Receive SensitivityIGTP-802T: -13.5dBm
IGTP-802TS: -14.4dBm
IGTP-805AT: Varying on SFP Module
Maximum Input PowerIGTP-802T: -18dBm
IGTP-802TS: -20dBm
IGTP-805AT: Varying on SFP Module
Power Over Ethernet
PoE StandardIEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
PoE Power Output52V DC: 15.4 watts
52V DC: 30 watts
PoE Power Supply TypeEnd-span
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget30 watts
Hardware Specifications
SpeedTwisted-pair:
10/20Mbps for half/full duplex
100/200Mbps for half/full duplex
1000/2000Mbps for full duplex

Fiber Optic:
200Mbps / 2000Mbps for full duplex
Flow ControlBack pressure for half duplex mode
IEEE 802.3x pause frame for full duplex mode
Maximum Frame Size9K
LEDSystem: Power 1, Power 2 and Fault LED (Green)
Fiber 1000BASE-X: LNK/ACT (Green)
TP 10/100/1000BASE-T: LNK/ACT, 1000 (Green)
PoE: Power-in-use (Orange)
Dimensions (W x D x H)135 x 87 x 32 mm
WeightIGTP-802T: 510g
IGTP-802TS: 510g
IGTP-805AT: 500g
Unit Input Voltage12 ~ 48V DC
24V AC
Power Consumption24V: 4.3watts/14BTU, 48V: 4.8watts/16BTU (without PoE)
24V: 33watts/112BTU, 48V: 31watts/105BTU (with PoE)
Link Fault Passthrough DIP SwitchON/OFF
EnclosureIP30 metal case
InstallationDIN-rail kit and wall-mount ear
ESD Protection6KV DC
AlarmProvides one relay output for power failure
Alarm relay current carry ability: 1A @ DC 24V
Cables10/100/1000BASE-T:
2-pair UTP Cat. 3, 4, 5, 5e, 6 (maximum 100 meters)
EIA/TIA-568 100-ohm STP (maximum 100 meters)

100BASE-FX/1000BASE-SX/LX:
Multi-mode: 50/125μm or 62.5/125μm optical fiber
Single-mode: 9/125μm optical fiber
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Protocols and Standards ComplianceIEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3z Gigabit Ethernet over Fiber Optic
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Stability TestingIEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Environment
TemperatureOperating: -40~75 degrees C
Storage: -40~85 degrees C
HumidityOperating: 5~90% (non-condensing)
Storage: 5~90% (non-condensing)

 

The deployment of flexible and user-friendly PoE and Gigabit Fiber Extension

The IGTP-80xT provides the most straightforward method for powering network equipment, including multi-channel (IEEE 802.11a/b/g/n/ac) wireless LAN access points, PTZ (Pan, Tilt & Zoom) IP cameras, speed dome IP cameras, color touch-screen VoIP telephones, and other network devices that need more power to function normally. Customers can, for instance, flexibly deploy security IP cameras, wireless access points, and other IEEE 802.3at/IEEE 802.3af compliant network equipment in public areas like railway stations, freeways, airports, and campuses to suit their needs for surveillance and wireless roaming.

Purchase Information

Industrial Media Converter (SC,MM) IGTP-802T 1000BASE-SX to 10/100/1000BASE-T 802.3at IGTP-802TS 1000BASE-LX to 10/100/1000BASE-T 802.3at Industrial Media Converter (SC,SM) -10km
Industrial Media Converter, IGTP-805AT 1000BASE-SX/LX to 10/100/1000BASE-T 802.3at PoE+ (mini-GBIC, SFP)Industrial Media Converter (SC,MM) IGTP-802T 1000BASE-SX to 10/100/1000BASE-T 802.3at IGTP-802TS 1000BASE-LX to 10/100/1000BASE-T 802.3at Industrial Media Converter (SC,SM) -10km
Industrial Media Converter, IGTP-805AT 1000BASE-SX/LX to 10/100/1000BASE-T 802.3at PoE+ (mini-GBIC, SFP)


We are the Leading Supplier of DIN-rail Gigabit PoE Converter. We have wide range of DIN-rail Gigabit PoE Converter such as IGTP-80xT Series, IGTP-2205AT, IGUP-1205AT.
PLANET IGTP-80xT Industrial Gigabit Media Converter combines Ethernet media conversion (from 1000BASE-X to 10/100/1000BASE-T) with 802.3at Power over Ethernet Plus (PoE+) injector to deliver both up to 30 watts of power output and high data transmission speed to PDs (powered devices) installed in a remote area where sufficient and reliable power input is required. Its 1000BASE-X fiber optic uplink port provides long distance, high speed and stable data transmission to a remote core network. The special and convenient power system of the IGTP-80xT supports 12~48V DC power input or 24V AC power input for power redundancy and operational flexibility.
We provide All types of DIN-rail Gigabit PoE Converter in Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, GOA, Gurgaon, PAN India