Search Products


IGW1114

  • Support 4 3IN1 serial ports and 2 10/100Base-T(X) self-adaptive Ethernet interfaces
  • Support conversion between Modbus RTU/ASCII and Modbus TCP protocol
  • Support RTU Master, RTU Slave, ASCII Master, ASCII Slave and other operating modes
  • Support -40~75℃ wide temperature operation
  • Description
  • Specification

The Modbus gateway IGW1114-4DI(3IN1)-DB-2P(1248VDC) is made to integrate Modbus RTU/ASCII and Modbus TCP; it can convert between the Modbus RTU/ASCII and Modbus TCP protocols. Two copper 100M Ethernet ports and four 3IN1 serial ports are supported by this equipment. They use wall mounting or DIN-Rail mounting to accommodate many application scenarios.

Numerous network protocols, including Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS, and DHCP protocols, are supported by Modbus gateway. It has full administration capabilities and allows things like access control, quick configuration, online upgrading, etc. It supports up to 32 TCP Slave requests in Master mode and 16 TCP Master connections in Slave mode. RTU Master, RTU Slave, ASCII Master, ASCII Slave, and other operating modes are supported. Additionally supported are TELNET, WEB, and other access methods. It may give you a positive user experience through its user-friendly network management system interface and straightforward, practical operation.

 

Device factory defaults can be restored via a DIP switch. Hardware has been designed fanless, with low power consumption, a wide range of temperature and voltage, and has passed stringent industrial standard tests, making it suitable for the tough EMC requirements of the industrial scene environment. It can be utilized in a variety of applications, including PLC control and management, building automation systems, healthcare automation systems, measuring instruments, and systems for monitoring environmental pressures.

 

Benefits and Features

 

Supporting dual IP and MAC addresses, two 10/100Base-T(X) self-adaptive Ethernet interfaces, and two network management or backup requirements

Support Line speed of 300bps-115200bps and non-blocking communication

RTS/CTS, DTR/DSR, and XON/XOFF flow control are supported.

Support for character-based response timeouts

Support for additional operating modes, including RTU Master, RTU Slave, ASCII Master, and ASCII Slave

32 TCP Slave requests may be supported in Master mode.

16 TCP Master connections may be supported in Slave mode.

In order to achieve flexible access between Master and Slave devices, support virtual and real ID mapping.

Support IP address and MAC address filtering, making precise access control simple to implement.

Support user management classification to accomplish humanized authorization management.

Support serial port status and parameter monitoring so that the current state of communication is visible at a glance.

support for access control, TELNET, Web configuration forms, and Windows configuration tools

For device rapid configuration and online upgrading, file management is practical.

Ethernet Port

 

Standard: 10Base-T, 100Base-TX

Protocol: Modbus TCP, TCP, IP, UDP, ARP, HTTP, TELNET, SNMP, ICMP, DHCP, DNS

Rate: 10/100M automatic flow control, MDI/MDI-X autotunning

Interface quantity: 2

Interface form: RJ45

Duplex mode: full/half duplex mode self-adaption

 

Serial Port

 

Standard: EIA RS-232C, RS-485, RS-422

Protocol: Modbus RTU/ASCII

Quantity of serial port: 4 3IN1 serial port

RS-232 signal: RXD, TXD, GND

RS-485 signal: D+, D-, GND

RS-422 signal: T+, T-, GND, R+, R-

Baud rate: 300-115200bps

Data bit: 7bit, 8bit

Parity bit: None, Even, Odd, Space, Mark

Stop bit: 1bit, 2bit

Interface form: DB9 Male

Directional control: RS-485 direction adopts Automatic Data Direction Control technology

Pull high/low resistor for RS-485: 4.7kΩ

Intensity of electromagnetic isolation: 2KV

Operating mode: RTU Master, RTU Slave, ASCII Master and ASCII Slave

Connection quantity: up to 32 TCP Slave requests are supported under Master mode

                                      up to 16 TCP Master connections are supported under Slave mode

 

Configuration

 

WEB configuration management, TELNET configuration, Windows configuration tool

 

Security

 

Classification of User Permissions, IP address filtering, MAC address filtering, WEB Console, TELNET Console

 

 

Indicator

 

Power supply indicator, running indicator, Ethernet port indicator, serial port indicator

 

Power

Requirement

 

 

12~48VDC, 4-pin terminal blocks

Power supply nonpolarity

 

Power

Consumption

 

No-load: 2.59W@48VDC

Full-load: 2.93W@48VDC

 

Environmental

Limit

 

Operating temperature: -40~75℃

Storage temperature: -40~85℃

Relative humidity: 5%~95%(no condensation)

 

Physical

Characteristic

 

Housing: IP40 protection, metal

Installation: DIN-Rail or wall mounting

Dimension (W x H x D): 53mm×138mm×110mm

Weight: 640g

 

Industrial

Standard

 

IEC 61000-4-2 (ESD, Electro-static Discharge), Level 3

Air discharge: ±8kV

Contact discharge: ±6kV

IEC 61000-4-4 (EFT/B, Electrical Fast Transient/Burst), Level 3

Power supply: ±2kV

Signal: ±1kV

IEC 61000-4-5 (Surge), Level 3

Power supply: common mode ±2kV, differential mode ±1kV

Signal: common mode ±2kV, differential mode ±1kV

Shock: IEC 60068-2-27

Free fall: IEC 60068-2-32

Vibration: IEC 60068-2-6

 

Certification

 

CE, FCC, RoHS

 

Warranty

 

3 years

 


Related Products

We Bluboxx Communications Having Expertise In Providing Complete Networking Solutions In Pune And All Over PAN India.
We Provide complete Modbus Gateways Solutions in Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, GOA, Gurgaon, PAN India.