The Modbus gateway IGW1114-4DI(3IN1)-DB-2P(1248VDC) is made to integrate Modbus RTU/ASCII and Modbus TCP; it can convert between the Modbus RTU/ASCII and Modbus TCP protocols. Two copper 100M Ethernet ports and four 3IN1 serial ports are supported by this equipment. They use wall mounting or DIN-Rail mounting to accommodate many application scenarios.

Numerous network protocols, including Modbus, TCP, IP, UDP, TELNET, ARP, ICMP, HTTP, DNS, and DHCP protocols, are supported by Modbus gateway. It has full administration capabilities and allows things like access control, quick configuration, online upgrading, etc. It supports up to 32 TCP Slave requests in Master mode and 16 TCP Master connections in Slave mode. RTU Master, RTU Slave, ASCII Master, ASCII Slave, and other operating modes are supported. Additionally supported are TELNET, WEB, and other access methods. It may give you a positive user experience through its user-friendly network management system interface and straightforward, practical operation.

Device factory defaults can be restored via a DIP switch. Hardware has been designed fanless, with low power consumption, a wide range of temperature and voltage, and has passed stringent industrial standard tests, making it suitable for the tough EMC requirements of the industrial scene environment. It can be utilized in a variety of applications, including PLC control and management, building automation systems, healthcare automation systems, measuring instruments, and systems for monitoring environmental pressures.

Benefits and Features

Supporting dual IP and MAC addresses, two 10/100Base-T(X) self-adaptive Ethernet interfaces, and two network management or backup requirements

Support Line speed of 300bps-115200bps and non-blocking communication

RTS/CTS, DTR/DSR, and XON/XOFF flow control are supported.

Support for character-based response timeouts

Support for additional operating modes, including RTU Master, RTU Slave, ASCII Master, and ASCII Slave

32 TCP Slave requests may be supported in Master mode.

16 TCP Master connections may be supported in Slave mode.

In order to achieve flexible access between Master and Slave devices, support virtual and real ID mapping.

Support IP address and MAC address filtering, making precise access control simple to implement.

Support user management classification to accomplish humanized authorization management.

Support serial port status and parameter monitoring so that the current state of communication is visible at a glance.

support for access control, TELNET, Web configuration forms, and Windows configuration tools

For device rapid configuration and online upgrading, file management is practical.