The XSLAN+4200 is designed to be used without any configuration. However, it may be necessary to access the switch administration, either to use a particular function such as, for example, VLANs, QoS or SNMP administration or to perform advanceddiagnostics.
In this case, the XSLAN+4200 is configured and managed by a PC with a web browser. No additional software is required.
The XSLAN family of SHDSL switches enables the connection of remote Ethernet networks using a simple copper pair in order to reach data rate up to 15Mbps.
A large range of Ethernet extenders is offered: Point-to-point, multipoint,4 SHDSL lines concentrator

A “PLUG AND PLAY” MODEL

Activation of a point to point connection (XSLAN+4200)or web page (XSLAN+4200).

SHDSL LINE CONCENTRATOR

XSLAN-4200 is a 4 lines concentrator to interconnect 4 remote Ethernet networks. The XSLAN-XXX does concentrate 2 lines.

DAISY CHAIN NETWORK

The XSLAN-2400 can be used to build a daisy chain topology via a copper pair.
Auto-negociationThis configuration mode can be used to quickly plug the XSLAN to the copper pair without knowing the XSLAN status (master or slave).

FAILSAFE RING

XSLAN is working with RSTP or Etic Telecom protocol in order to build any type of topology with redundancy.
“The By-Pass”The “By-Pass” feature is used to close the line (electro-mechanical relay) when the XSLAN is switched off. The daisy chain is thus not cut.

SHDSL LINE AGGREGATION TO INCREASE DATA RATE AND SECURITY

XSLAN-2xxx and XSLAN-42xx can aggregate SHDSL lines to increase the data rate or to offer a line backup
Loop VPN for secured ringWhen the SHDSL network forms a daisy chain and when it is not possible to form a secured ring, the “loop VPN” function allows a network redundancy if an Internet or a private (MPLS) connectionis available at each end of the SHDSL network.