High-speed networking is provided by many dual speed fiber ports and 10Gbps fiber ports.

20 100/1000Mbps SFP ports, 4 shared SFP ports, 4 10G SFP+ ports, and Layer 3 IP routing are all included in the PLANET IGS-6325-20S4C4X industrial Layer 3 managed switch's 1U enclosure. The IGS-6325-20S4C4X can manage extraordinarily huge amounts of data in a secure topology connecting to an industrial backbone or high capacity servers thanks to its 10Gbps uplink. In the temperature range of -40 to 75 degrees Celsius, the IGS-6325-20S4C4X can deliver non-blocking switch fabric and wire-speed throughput as high as 128Gbps. The processes involved in updating the industrial LAN to meet rising bandwidth demands are significantly streamlined. Additionally, it uses a "Front Access" design that is user-friendly for simple wiring and maintenance of the IGS-6325-20S4C4X when installed in the cabinet.

Support for Layer 3 Routing

The Layer 3 IPv4/IPv6 VLAN static routing and IPv4 OSPFv2 (Open Shortest Path First) settings may both be configured manually and automatically on the IGS-6325-20S4C4X, which makes it easier for network administrators to increase network efficiency. The OSPF is a link-state-based internal dynamic routing mechanism for autonomous systems. By exchanging link states among Layer 3 switches, the protocol builds a database of link state, and then uses that database to form a route table using the Shortest Path First method.

Network Security Solution to Reduce Security Risks

Virtually no effort or expense is required to implement the cybersecurity feature offered to protect the switch management in a mission-critical network. The IGS-6325-20S4C4X has SNMP, console, and web administration interfaces for effective management. The IGS-6325-20S4C4X provides an accessible, platform independent management and configuration capability with its built-in web-based management interface. The IGS-6325-20S4C4X supports SNMP, and any management software built on the SNMP protocol can be used to manage it. The IGS-6325-20S4C4X delivers Cisco-like command via Telnet or console port, which reduces product learning time because the client doesn't need to learn new command from these switches. Additionally, by supporting SSH, SSL, and SNMP v3 connections, which can encrypt the packet content during each session, the IGS-6325-20S4C4X provides remote secure management.

Flexible Network Connectivity for Factory Automation is Offered via Modbus TCP

The IGS-6325-20S4C4X may readily interface with SCADA systems, HMI systems, and other data acquisition systems in factory floors thanks to the Modbus TCP/IP protocol that is supported. Administrators may simply improve factory monitoring and maintenance by remotely monitoring the industrial Ethernet switch's working information, port information, and connection status.

For Industrial Computing Networks, 1588 Time Protocol

The IGS-6325-20S4C4X supports MEF service delivery and timing over packet solutions for IEEE 1588 and synchronous Ethernet, making it the perfect choice for telecom and carrier Ethernet applications.

DC and AC Power Redundancy for Continuous Operation

In order to assure continuous operation, the IGS-6325-20S4C4X has two 2460V DC power supplies and a redundant 100240V AC power supply. Its redundant power system was created expressly to meet the needs of high-tech buildings that demand the highest level of power integrity. Additionally, the IGS-6325-20S4C4X can be used as a telecom level device and installed in practically any challenging environment thanks to the implementation of the 2460V DC power supply.

External Alarm Digital Input and Digital Output

The IGS-6325-20S4C4X provides Digital Input and Digital Output for external alarm device on the front panel to assist network administrators in effectively managing the unforeseen network scenarios. The state of external devices, such as door incursion detectors, can be detected and recorded using the digital input. If there is a power outage or port link-down on the IGS-6325-20S4C4X, an alarm could be sent using the digital output.

An efficient alarm alert for increased protection

The Fault Alarm feature of the IGS-6325-20S4C4X can notify users when there is a problem with the switches. The users wouldn't have to waste time trying to locate the issue with this great function. It will contribute to time and human resource savings.

Fast Recovery for Critical Network Applications with Redundant Ring

To avoid disruptions and outside intrusions, the IGS-6325-20S4C4X uses redundant ring technology and has a powerful, quick self-recovery capability. To increase system dependability and uptime in challenging factory conditions, it integrates modern ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system. The recovery time of a data link in a straightforward Ring network can be as quick as 10ms.

Dual IPv6/IPv4 Stack

Data centers, campuses, telcos, and other organizations can experience the IPv6 era with the least amount of investment thanks to the IGS-6325-20S4C4X's support for both IPv6 and IPv4 protocols. This is because its network facilities do not need to be changed or upgraded if an IPv6 FTTx edge network is set up.

Dependable Layer 2 features

Advanced switch management features like dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2 to Layer 4 QoS, bandwidth control, and IGMP/MLD Snooping can be programmed into the IGS-6325-20S4C4X. The IGS-6325-20S4C4X permits fail-over and the operation of a high-speed trunk in combination with multiple fiber ports via link aggregation of supporting ports.