Search Products


WGS-4215-8T2S

8-port 10/100/1000BASE-T Gigabit RJ45 copper
2 100/1000BASE-X mini-GBIC/SFP slots
Supports EFT protection of 6KV DC for power line
Supports ESD 6KV DC Ethernet protection

  • Description
  • Specification
  • Application

Expanded and Simple to Deploy Network

The PLANET WGS-4215-8T2S is a cutting-edge Industrial 8-port 10/100/1000T + 2-port 100/1000X SFP Wall-mount Managed Switch that features IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, and a user-friendly interface. It can also be mounted on a wall at any convenient location. In every situation, the WGS-4215-8T2S can function dependably, steadily, and silently without suffering performance loss. The WGS-4215-8T2S is a perfect option to fulfill the need for the following network applications thanks to its ultra-fast networking speed and operating temperature range of -40 to 75 degrees C in a small yet durable IP30 metal housing:

Home and building automation network
IP surveillance for the Internet of Things
LAN wireless


Contemporary Wall-mount Installation

The WGS-4215-8T2S is specifically made to be put in a small space, like an electrical box or wall enclosure. Any place with limited room may readily accommodate the small, flat, and wall-mounted design. It uses the user-friendly "Front Access" design, which makes it very simple for technicians to install, cable wire, monitor, and maintain the WGS-4215-8T2S when it is housed in an enclosure. The WGS-4215-8T2S's versatility in use is increased by the possibility of fixed wall mounting, magnetic wall mounting, or DIN rail installation.

High Availability Network System Dual Power Input

To increase system dependability and uptime, the WGS-4215-8T2S has a robust dual power input system (12V48V DC or 24V AC) integrated into the customer's automation network. In the example below, if the 3-pin terminal block stops functioning, the hardware failover capability will immediately turn on so that the WGS-4215-8T2S can continue to be powered alternately by the DC plug and remain operational.


Environmentally Resistant Architecture

The WGS-4215-8T2S offers a high level of immunity to electromagnetic interference and strong electrical surges, which are typically encountered on plant floors or in curb side traffic control cabinets without air conditioners, thanks to IP30, flat but sturdy metal housing protection. The WGS-4215-8T2S can be used in practically any challenging environment because it can function in a temperature range of -40 to 75 degrees C.

Dual Stack IPv6/IPv4 Management

The WGS-4215-8T2S, which supports IPv6 and IPv4 protocols, enables SMBs to enter the IPv6 era with the least amount of investment because its network infrastructure does not need to be rebuilt or upgraded if an IPv6 FTTx edge network is put up.

Dependable Layer 2 features

Advanced switch management features like dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping can be programmed into the WGS-4215-8T2S. The WGS-4215-8T2S offers fail-over and the operation of a high-speed trunk in combination with many ports, such as a 16Gbps fat pipe, via link aggregation. Also incorporated is the Layer 2 protocol known as Link Layer Discovery Protocol (LLDP), which aids in learning the fundamentals of nearby devices on the local broadcast domain.

Effective Traffic Management

Strong QoS features and effective traffic management are abundant in the WGS-4215-8T2S, which improves services for enterprise-class data, voice, and video solutions. The capability includes 802.1p/CoS/IP DSCP QoS priority, remarking, per port bandwidth control, broadcast/multicast/unicast storm control, and 802.1p/CoS/IP DSCP QoS priority. It ensures the optimum performance for VoIP and video stream transmission and gives businesses the ability to fully utilize the constrained network resources.

An approachable and secure management

The WGS-4215-8T2S has SNMP, Telnet, and web administration interfaces for effective management. The WGS-4215-8T2S provides an easy-to-use, platform-independent management and configuration facility with its integrated web-based management interface. The switch may be managed using any common management software because it supports the SNMP standard. Telnet can be used to connect to the switch for text-based management. Additionally, by supporting SSH, SSL, and SNMP v3 connections, which encrypt the packet content during each session, the WGS-4215-8T2S provides secure remote management.

Contemporary Network Security

An extensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) is provided by PLANET WGS-4215-8T2S for ensuring security at the edge. In order to provide port level security and prevent unauthorized users from using it, its protection system also includes 802.1X port-based user and device authentication, which may be installed with RADIUS. To ensure user privacy, communication between edge ports can be stopped using the protected port feature. Additionally, the WGS-4215-8T2S has DHCP snooping, IP source guard, and dynamic ARP inspection services to shield against IP snooping attacks and to filter out ARP packets with erroneous MAC addresses. The time and effort required by network managers to build highly secure business networks has significantly decreased.

Solution for Long-Distance Extension and Flexibility

As the WGS-4215-8T2S has 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switches and monitoring centers across long distances, the two mini-GBIC slots incorporated into the device support SFP auto-detection and dual speed. With multi-mode fiber, the range can be increased to 2 kilometers, and with single-mode fiber or WDM fiber, it can be increased to 10/20/30/40/50/60/70/120 kilometers. They work effectively for applications that are distributed throughout enterprise data centers.

A Mechanism for Intelligent SFP Diagnosis

The SFP-DDM (Digital Diagnostic Monitor) capability of the WGS-4215-8T2S enables network administrators to easily track real-time SFP characteristics such optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.

Prepared for the IoT Generation

The usage of the internet is widespread around the world, with consumers regularly accessing it through their laptops, smart phones, and tablets. However, customers now want more from the ease of the internet, such as the ability to use their mobile devices to control objects online, which makes life easier. In order to assist customers in implementing the Internet of Things (IoT) on the SOHO/Home network, the WGS-4215-8T2S is based on such a concept. Home automation is now a reality thanks to gigabit networks, which can effortlessly cloud IoT devices and turn a house into a smart home.

Purchase Information
Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP, WGS-4215-8T2S Managed Wall Switch (-40 to 75 degrees Celsius)
Accessories
40W 24V DC PWR-40-24 Industrial DIN-rail Single Output Power Supply (-20 to 70 degrees Celsius)
60W 24V DC PWR-60-24 Industrial DIN-rail Single Output Power Supply (-20 to 70 degrees Celsius)
75W 24V DC PWR-75-24 Industrial DIN-rail Single Output Power Supply (-10 to 60 degrees Celsius)

Hardware Specifications
Copper PortsEight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC SlotsTwo 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode
Switch ArchitectureStore-and-Forward
Switch Fabric20Gbps/non-blocking
Switch Throughput@64 bytes14.8Mpps @64 bytes
MAC Address Table8K entries
Shared Data Buffer4.1 megabits
Flow ControlIEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame9216 bytes
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
LEDSystem:
Power (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 8):
1000 LNK / ACT (Green), 10/100 LNK/ACT (Orange)
100/1000Mbps SFP Interfaces (Port 9 to Port 10):
1000 LNK / ACT (Green), 100 LNK/ACT (Orange)
Connector■ Removable 3-pin terminal block for power input
 - Pin 1/2 for DC Power (Pin 1: v+ / Pin 2: V-)
 - Pin 3 for earth ground
■ DC power jack with 2.0mm central pole
Power Requirements12V~48V DC,1A / 24V AC,1A terminal block
12V~48V, 1A DC jack power input
Power Consumption/ DissipationMax. 7.9 watts/26BTU
Dimensions (W x D x H)178 x 25 x 134 mm
Weight663g
ESD Protection6KV DC
EFT Protection6KV DC
EnclosureMetal
InstallationWall mount, magnetic wall mount and DIN-rail kit
Layer 2 Functions
Port MirroringTX/RX/Both
Many-to-1 monitor
VLAN802.1Q tagged-based VLAN
Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling (VLAN stacking)
Voice VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Management VLAN
Link AggregationIEEE 802.3ad LACP and static trunk
Supports 4 groups with 8 ports per trunk
Spanning Tree ProtocolSTP, IEEE 802.1D Spanning Tree Protocol
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
MSTP, IEEE 802.1s Multiple Spanning Tree Protocol
STP BPDU Guard, BPDU Filtering and BPDU Forwarding
IGMP SnoopingIPv4 IGMP (v2/v3) snooping
IGMP querier
Up to 256 multicast groups
MLD SnoopingIPv6 MLD (v1/v2) snooping, up to 256 multicast groups
Access Control ListIPv4/IPv6 IP-based ACL / MAC-based ACL
IPv4/IPv6 IP-based ACE / MAC-based ACE
QoS8 mapping ID to 8 level priority queues
- Port Number
- 802.1p priority
- DSCP/IP precedence of IPv4/IPv6 packets
Traffic classification based, strict priority and WRR
Ingress/Egress Rate Limit per port bandwidth control
SecurityIEEE 802.1X port-based authentication
Built-in RADIUS client to co-operate with RADIUS server
RADIUS/TACACS+ authentication
IP-MAC port binding
MAC filtering
Static MAC address
DHCP snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
Storm control support
- Broadcast/Unknown unicast/Unknown multicast
Management Functions
Basic Management InterfacesWeb browser/Telnet/SNMP v1, v2c, v3
Firmware upgrade by HTTP/TFTP protocol through Ethernet network
Configuration upload/download through HTTP/TFTP
Remote/Local Syslog
System log
LLDP protocol
SNTP
PLANET Smart Discovery Utility
Secure Management InterfacesSSH, SSL, SNMP v3
SNMP MIBsRFC 1213 MIB-II
RFC 1215 Generic Traps
RFC 1493 Bridge MIB
RFC 2674 Bridge MIB Extensions
RFC 2737 Entity MIB (Version 2)
RFC 2819 RMON (1, 2, 3, 9)
RFC 2863 Interface Group MIB
RFC 3635 Ethernet-like MIB
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.3ad Port Trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN Tagging
IEEE 802.1x Port Authentication Network Control
IEEE 802.1ab LLDP
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
Environment
OperatingTemperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
StorageTemperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Accessories
Standard Accessories■ Quick Installation Guide x 1
■ 3-pin Terminal Block Connector x 1
■ Wall-mounted Kit x 1
■ DIN-rail Kit x 1
■ Magnet Kit x 1
■ RJ45 Dust Cap x 8
■ SFP Dust Cap x 2

 

Building Security Automation Switch

The WGS-4215-8T2S Industrial Wall-mount Managed Switch provides a comprehensive Layer 2 to Layer 4 Access Control List (ACL), making it ideal for facilities where security must be carefully enforced. By rejecting packets based on source and destination IP addresses, TCP/UDP ports, or predefined standard network applications, the switch can impose restrictions on network access. A carefully monitored network can be quickly and readily obtained with the WGS-4215-8T2S.

MAN Application for FTTX

The WGS-4215-8T2S uses double tag VLAN (Q-in-Q) technology to offer service providers reduced cost and simple operation while carrying traffic for numerous clients across their networks. The deployment distance of the WGS-4215-8T2S can be increased to 120 kilometers (single-mode fiber) thanks to two dual-speed SFP slots that are incorporated into the device. This device offers a high-performance edge service for FTTx solutions.
The different distances of SFP and Bidi (WDM) transceivers are optional for clients when building a network solution for FTTH (Fiber to the Home) or FTTC (Fiber to the Curb) for ISPs, and FTTB (Fiber to the Building) for companies. The WGS-4215-8T2S's 8 Gigabit ports can be set up with VLAN settings and connected to numerous units, offices, floors, homes, and departments for security and other purposes.

Security Building Automation Switch

Suitable for buildings where security is strictly to be enforced, the WGS-4215-8T2S Industrial Wall-mount Managed Switch offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the WGS-4215-8T2S, a tightly-controlled network can be easily had in no time.

Constant Data Transmission via Redundant Connection

Strong, quick self-recovery capabilities allow the WGS-4215-8T2S to stop disruptions and outside intrusions. To increase system dependability and availability, it integrates Multiple Spanning Tree Protocol (802.1s MSTP) into the automation network of the customer.


Switch for Industrial Area Data Collection and Forwarding

The WGS-4215-8T2S has 2 Gigabit SFP interfaces (ports 9 and 10), 8K MAC address table, and 8 10/100/1000 Mbps ports with auto MDI/MDIX feature. These features allow the WGS-4215-8T2S to perform wire-speed packet transfers without the risk of packet loss. The WGS-4215-8T2S's thin type IP30 metal housing makes it the perfect choice for the majority of harsh industrial applications.

Purchase Information

Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP, WGS-4215-8T2S Managed Wall Switch (-40 to 75 degrees Celsius)
Accessories
40W 24V DC PWR-40-24 Industrial DIN-rail Single Output Power Supply (-20 to 70 degrees Celsius)
60W 24V DC PWR-60-24 Industrial DIN-rail Single Output Power Supply (-20 to 70 degrees Celsius)
75W 24V DC PWR-75-24 Industrial DIN-rail Single Output Power Supply (-10 to 60 degrees Celsius)


Related Products

We are the Leading Supplier of L2/L4 Managed Gigabit Ethernet Switch such as WGS-4215-8T2S, WGS-4215-8T.
Designed to be installed in a wall enclosure or simply mounted on a wall at any convenient location, PLANET WGS-4215-8T2S, an innovative, Industrial 8-port 10/100/1000T + 2-port 100/1000X SFP Wall-mount Managed Switch, offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, and user-friendly interface. The WGS-4215-8T2S is able to operate reliably, stably and quietly in any environment without affecting its performance. Featuring ultra networking speed and operating temperature ranging from -40 to 75 degrees C.
We Serve all these L2/L4 Managed Gigabit Ethernet Switches in Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, GOA, Gurgaon, PAN India