Search Products
Search Products
IGS-10020HPT
L2+ Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch with Wide Operating Temperature
- Description
- Specification
- Application
Design for Environmental Hardness
The industrial-grade IP30 metal enclosure of the PLANET IGS-10020HPT 8-port Gigabit 802.3at PoE+ Switch ensures reliable performance in harsh, industrial settings. The IGS-10020HPT thus offers a high level of immunity to electromagnetic interference and strong electrical surges, which are typically encountered on plant floors or in curbside traffic control cabinets.
The IGS-10020HPT may be used in practically any challenging environment because of its wide operating temperature range of -40 to 75 degrees C. For effective use of cabinet space, the IGS-10020HPT also supports DIN rail or wall installation.
Critical Network Applications: Redundant Ring, Quick Recovery
The IGS-10020HPT supports redundant ring technology and offers powerful, quick self-recovery to guard against interruptions and outside intrusions. It integrates cutting-edge ITU-T G.8032 ERPS (Ethernet Ring Protection Switching), Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer's industrial automation network to improve system dependability and uptime in tough production conditions.
With switching recovery capabilities utilized to construct fault tolerant ring and mesh network designs, the IGS-10020HPT also safeguards customers' industrial network connectivity. If the industrial network were to mistakenly go down, the fault recovery times may be as little as 50 ms, which would enable the network to immediately resume regular functioning.
Industrial Ethernet PoE Solution for ITS and Vehicles
Due to its E-Mark compliance, the IGS-10020HPT is suited for a range of in-vehicle applications and surveillance systems. The IGS-10020HPT uses 1248V DC to 52V power boost technology to address the power source issue while not requiring specific power supplies, making it easier to use 802.3at PoE+ with applications that require industrial- and transportation-level applications that typically use 1248V DC power input. It satisfies the demand for power as well as data delivery for wireless service, video transmission, and surveillance system on the bus, shuttle, and other vehicles.
Security and public service applications using high power PoE
The IGS-10020HPT has 8 10/100/1000Mbps ports with IEEE 802.3at Power over Ethernet Plus (PoE+) that combines up to 36 watts of power output and data per port over one Cat5E/6 Ethernet cable to meet the demand for High Power PoE for network applications with Gigabit speed transmission under wide temperature conditions. The IGS-10020HPT is specifically made to meet the rising demand for higher power consuming network PDs (powered devices), such as multi-channel (802.11a/b/g/n) wireless LAN access points, PTZ (Pan, Tilt, and Zoom)/Speed Dome network cameras, and other PoE network devices, with a total system PoE budget of 240 watts, which is double that of the current 802.3af PoE standard.
ONVIF devices that are practical and smart and have a detection feature
OnVIF Support, a fantastic new feature from PLANET, is made exclusively for working with video IP surveillance systems. To search and display all ONVIF devices using network application from the IGS-10020HPT's GUI, you only need to click once. A remote assembly line inspection or monitoring feature is also available. You can upload floor photographs to the switch. Additionally, you may get online/offline status and real-time surveillance data, and you can control the PoE reboot from the GUI.
Unique PoE Functions Built-In for Surveillance Management
The IGS-10020HPT is an industrial managed PoE switch for a surveillance network and has the following smart PoE management features:
- SMTP/SNMP Trap Event Alert
- PD Alive Check
- Scheduled Power Recycling
Check If Intelligent Powered Device Is Alive
The IGS-10020HPT PoE Switch can be set up to use a ping action to continuously check on the condition of connected PDs. The IGS-10020HPT recycles the power from the PoE port after the PD stops operating and responding and then restarts the PD. The PoE port will reset the PD power, which dramatically improves dependability and eases the administration burden on administrators.
Power Recycling on Schedule
Each of the connected PoE IP cameras or PoE wireless access points can be scheduled to restart once a week by the IGS-10020HPT. As a result, it will lessen the possibility of an IP camera or AP crash brought on by a buffer overflow.
Energy-saving PoE Schedule
The IGS-10020HPT, in addition to being able to deliver high watts of power, can effectively control the power supply in line with the global trend of energy conservation and contribute to environmental protection on Earth. The "PoE schedule" function integrated into the device enables or disables PoE power feeding for each PoE port during certain time intervals. This useful feature can assist SMBs or businesses save money and energy.
Alert from SMTP/SNMP Trap
The event alert function on the IGS-10020HPT can be used to diagnose an abnormal device caused by a network connection failure or a rebooting response.
For Better Protection, Useful Alarm Alert
When there is a problem with the switches, the IGS-10020HPT's Fault Alarm feature can notify the users. The users would save time by not having to search for the issue's location with this excellent feature. Both time and human resources will be saved.
For an external alarm, digital input and output
Digital Input and Digital Output are supported by the IGS-10020HPT on its upper panel. This external alarm gives customers the ability to use Digital Input to track the status of external devices (such door incursion detectors) and send an event alarm to the administrators. In the event that the IGS-10020HPT port indicates a link down, link up, or power failure, the administrators may be alerted via the digital output.
Software VLAN Routing at Layer 3 for IPv4 and IPv6 for Secure and Flexible Management
The IPv4/IPv6 software VLAN routing feature of the IGS-10020HPT allows for the crossover of different VLANs and different IP addresses with the goal of having a highly-secure, flexible management, and easier networking application. These features help customers stay on top of their businesses in addition to offering ultra high transmission performance and excellent Layer 2 technologies.
Effective Layer 2 Features
The IGS-10020HPT may be configured to do complex switch management tasks such IGMP snooping, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, and bandwidth control. The IGS-10020HPT offers 802.1Q tagged VLAN, and the maximum number of VLAN groups that may be used is 255. The functioning of a high-speed trunk combining several ports is made possible by the IGS-10020HPT through the aggregation of supporting ports. It allows for a maximum of 5 trunk groups, each with 2 ports, and it also supports fail-over.
Successful Secure Management
The IGS-10020HPT is furnished with a console, Web, and SNMP administration interface for effective management. The IGS-10020HPT provides a simple, platform-independent management and configuration facility through the integrated Web-based management interface. Telnet and the console port can be used to connect to the IGS-10020HPT for text-based management. Additionally, it provides secure remote management through any standard-based management software by enabling SNMPv3 connections, which encrypt the packet content at each session.
IGS-10020HPT | Industrial 8-port 10/100/1000T 802.3at PoE + 2-port 1G/2.5G SFP Managed Switch |
Hardware Specifications | |
---|---|
Version | 3 |
Copper Ports | 8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots | 2 100/1000/2500BASE-X mini-GBIC SFP ports (Port-9 and Port-10) |
Console | 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) |
Switch Architecture | Store-and-Forward |
Switch Fabric | 26Gbps/non-blocking |
Throughput (packet per second) | 14.8Mpps@ 64Bytes packet |
Address Table | 8K entries, automatic source address learning and aging |
Shared Data Buffer | 4Mbits |
Flow Control | IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex |
Jumbo Frame | 9Kbytes |
Reset Button | < 5 sec: System reboot > 5 sec: Factory default |
ESD Protection | 6KV DC |
EFT Protection | 6KV DC |
Enclosure | IP30 aluminum case |
Installation | DIN-rail kit and wall-mount kit |
Connector | Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND |
Alarm | One relay output for power failure. Alarm Relay current carry ability: 1A @ DC 24V |
DI/DO | 2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input Load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24V DC, 100mA max. |
LED Indicator | System: Power 1 (Green) Power 2 (Green) Fault Alarm (Green) Ring (Green) R.O. (Ring Owner) (Green) Per 10/100/1000T RJ45 Ports: PoE-in-Use (Orange) LNK/ACT (Green) Per 100/1000/2500BASE-X SFP Interface:: 100 LNK/ACT (Orange) 1G/2.5G LNK/ACT (Green) |
Dimensions (W x D x H) | 76.8 x 107.3 x 152 mm |
Weight | 1096g |
Power Requirements | DC 12-48V |
Power Consumption | 258 watts/880BTU (Full loading with PoE function) |
Power Over Ethernet | |
PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
PoE Power Supply Type | End-span |
PoE Power Output | Per port 52V DC, 350mA; max. 15.4 watts (IEEE 802.3af) Per port 52V DC, 590mA; max. 36 watts (IEEE 802.3at) |
Power Pin Assignment | 1/2(+), 3/6(-) |
PoE Power Budget | 60W maximum (DC 12V power input) 120W maximum (DC 24V power input) 240W maximum (DC 48V power input) |
Max. Number of Class 2 PDs @ 7 watts | 8 |
Max. Number of Class 3 PDs @ 15.4 watts | 8 |
Max. Number of Class 4 PDs @ 30.8 watts | 8 |
Layer 2 Function | |
Port Configuration | Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable |
Port Status | Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status |
Port Mirroring | TX/RX/both 1 to 1 monitor |
VLAN | 802.1Q tagged based VLAN, up to 255 VLAN groups Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN Voice VLAN GVRP MVR (Multicast VLAN Registration) Up to 255 VLAN groups, out of 4094 VLAN IDs |
Link Aggregation | IEEE 802.3ad LACP/static trunk Supports 5 trunk groups with 2 ports per trunk group |
QoS | Traffic classification based, strict priority and WRR 8-level priority for switching - Port number - 802.1p priority - 802.1Q VLAN tag - DSCP/TOS field in IP packet |
IGMP Snooping | IGMP (v1/v2/V3) snooping, up to 255 multicast groups IGMP querier mode support |
MLD Snooping | MLD (v1/v2) snooping, up to 255 multicast groups MLD querier mode support |
Access Control List | IP-based ACL/MAC-based ACL Up to 123 entries |
Bandwidth Control | Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps |
Storm Control | Unicast/Multicast/Broadcast |
Layer 3 Function | |
IP Interfaces | Max. 8 VLAN interfaces |
Routing Table | Max. 32 routing entries |
Routing Protocols | IPv4 software static routing IPv6 software static routing |
Management | |
Basic Management Interfaces | Console; Telnet; Web browser; SNMP v1, v2c |
Secure Management Interfaces | SSH, SSL, TLS, SNMP v3 |
ONVIF | ONVIF device discovery ONVIF device monitoring Floor Map |
SNMP MIBs | RFC-1213 MIB-II IF-MIB RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB RFC-2819 RMON MIB (Group 1, 2, 3 and 9) RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC-2933 IGMP-STD-MIB RFC3411 SNMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Power over Ethernet MIB |
Standards Conformance | |
Regulatory Compliance | FCC Part 15 Class A, CE |
Stability Testing | IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) |
Certification | e-Mark E24 ECE-R 010 |
Standards Compliance | IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3ab Gigabit 1000T IEEE 802.3z Gigabit SX/LX IEEE 802.3bz 2.5GBASE-X IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1x Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3ah OAM IEEE 802.1ag Connectivity Fault Management(CFM) IEEE 802.3az Energy Efficient Ethernet(EEE) RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 ITU-T G.8032 ERPS Ring ITU-T Y.1731 Performance Monitoring |
Environment | |
Operating Temperature | -40 ~ 75 degrees C |
Storage Temperature | -40 ~ 85 degrees C |
Humidity | 5 ~ 95% (non-condensing) |
PoE Switch for Industrial Area Department/Workgroup
The IGS-10020PT may simply create a power network for industrial use that is centrally controlled by an IP phone system, IP camera system, or WLAN AP group thanks to its up to 8 PoE+, in-line power interfaces. For example, in an industrial setting, 8 PoE IP cameras or wireless access points can be quickly put around the corner for wireless roaming or surveillance needs. The IGS-10020PT removes the power-socket restriction, which facilitates the installation of IP cameras or wireless AP quicker and more effective.
Wireless LAN Service and High Power IP Surveillance in Public Transportation
The IGS-10020PT may immediately connect to any IEEE 802.3at end-node, including PTZ (Pan, Tilt, and Zoom) network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points, thanks to the IEEE 802.3at Power over Ethernet Plus standard. For the transportation station to offer high speed and wide area Internet services to commuters, wireless LAN would be more effective. The transportation authority benefits from lower costs while offering better Internet services in more locations for the users thanks to the PoE wireless LAN topology.
Ideal Solution for Outdoor IP PoE Camera and NVR System Integration
The IGS-10020PT has 8 10/100/1000Mbps 802.3at PoE+ ports and can simultaneously supply 8 PoE IP cameras with electricity thanks to this. The IGS-10020PT may also connect to a core fiber switch and provide video streams to an NVR and a monitoring center via its two 100/1000BASE-X SFP connections. The IGS-10020PT makes it possible for the recorded video files from the 8 PoE IP cameras to be saved in the NVR systems thanks to the high-performance switch architecture. Additionally, the NVR systems may be managed and watched over both locally (through LAN) and remotely (via Internet). Unquestionably, the IGS-10020PT offers a superior secure surveillance system at a lower overall cost.
We have Expertise in providing the Best Quality L3 Ring Managed Ethernet Switches at Very Affordable Cost.
If you are looking for L3 Ring Managed Ethernet Switches such as IGS-6325-16T4S, IGS-6325-8T4X, IGS-6325-8UP2S2X, IGS-6325-8T8S Etc, then you can contact us for sure.
PLANET IGS-6325-16T4S is the smallest yet high-capacity, industrial-grade Layer 3 managed switch with high-density hybrid copper and fiber optic interfaces. It features 16 10/100/1000BASE-T RJ45 ports and 4 100/1000BASE-X SFP slots in a DIN-rail type rugged case and can operate stably under the temperature range from -40 to 75 degrees C.
We Provide All Types of L3 Ring Managed Ethernet Switch in Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, GOA, Gurgaon, PAN India