Search Products


WGS-5225-8P2S

Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch

  • Description
  • Specification
  • Application

Wall-mount PoE Managed Switch, Advanced L2+/L4 Switching, and Security

The PLANET WGS-5225-8P2S is an industrial wall-mount PoE managed switch that leverages PLANET intelligent PoE to improve the availability of industrial applications. Eight 10/100/1000BASE-T ports with 36-watt PoE, an integrated L2+/L4 Gigabit switching engine, IPv6/IPv4 dual stack management, and two additional 1000BASE-X SFP ports are included. With a total power budget of up to 240 watts for various PoE applications, networking speed, and an operating temperature range of -40 to 75 degrees C in a tiny but sturdy IP30 metal chassis, the WGS-5225-8P2S is the ideal choice to satisfy the need for the following network applications.

Network for home and building automation
Internet of Things (IoT) IP surveillance

     

Redundant Ring and Fast Recovery for Critical Network Applications

The WGS-5225-8P2S uses redundant ring technology and has a strong, quick self-recovery capacity to prevent interruptions and outside intrusions. It incorporates contemporary ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and dual power input system to boost system reliability and uptime in demanding production circumstances. In a certain simple ring network, a data link's recovery time can be as quick as 10ms.

ONVIF devices with practical and clever detection features

The amazing new ONVIF Support functionality from PLANET was developed especially to function with video IP surveillance systems. The WGS-5225-8P2S's GUI makes searching and viewing every ONVIF device possible with only one click using network applications. The switch also enables you to remotely examine or monitor an assembly line and upload floor images. Additionally, you might receive online/offline status, real-time surveillance data, and GUI-controlled PoE reboots.


Special PoE features that are built-in for managed powered devices

Given that it is the managed PoE switch for WLAN, VoIP, and surveillance networks, the WGS-5225-8P2S has the following special PoE management features:

Schedule for PoE and monitoring PoE usage with Intelligent Powered Device Alive Check for periodic PD life checks.

The WGS-5225-8P2S can be configured to continuously monitor the connected PD status via ping action. When it stops running and responding, the WGS-5225-8P2S will resume the PoE port power and the PD, restoring its functionality. Network dependability will be greatly increased by the PoE port's ability to reset the PD's power source and reduce administrative workload.

Power Recycled As Scheduled

The WGS-5225-8P2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot every week. As a result, it will be less likely for an IP camera or AP to crash due to a buffer overflow.

Energy Schedule for PoE

In addition to its ability to produce high wattages of power, the WGS-5225-8P2S can effectively control the power supply in line with the global trend of energy conservation and help to safeguard the environment. Since it allows you to enable or disable PoE power feeding for each PoE port during predefined time intervals, the "PoE schedule" function is a powerful tool for SMBs or corporations to save money and electricity. It also enhances security by turning off PDs that shouldn't be used after hours.

Wall-mount Installation Today

The WGS-5225-8P2S is designed to fit in a compact area, such as a wall enclosure or electrical box. The compact, flat, and wall-mounted form is easily adaptable to any space with a limited amount of space. When the WGS-5225-8P2S is contained in an enclosure, it features the user-friendly "Front Access" design, which makes it very simple for workers to install, cable wire, monitor, and repair the device. The WGS-5225-8P2S's ability to be installed on a fixed wall, a magnetic wall, or a DIN rail increases its adaptability in use.

SMTP/SNMP Trap Events Alert

The WGS-5225-8P2S provides an event alert feature to help diagnose an irregular device brought on by a lost network connection or a device rebooting response.

IPv4 and IPv6 Layer 3 Software VLAN Routing for Secure and Flexible Management

The WGS-5225-8P2S offers great Layer 2 technologies, extremely high transmission performance, and IPv4/IPv6 software VLAN routing to assist customers stay on top of their enterprises. Customers can use this functionality to traverse different VLANs and IP addresses, resulting in a more user-friendly networking application and a flexible, highly secure administration environment.

Reliable Layer 2 capabilities

The WGS-5225-8P2S may be configured with advanced switch management capabilities like dynamic port link aggregation, Q-in-Q VLAN, private VLAN, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control, and IGMP snooping. The 802.1Q tagged VLAN offered by the WGS-5225-8P2S supports up to 255 VLAN groups. Through the aggregation of supporting ports, the WGS-5225-8P2S enables the operation of a high-speed trunk integrating several ports. It permits a maximum of two trunk groups with two ports each and supports fail-over.

An Intelligent SFP Diagnosis Mechanism

The WGS-5225-8P2S supports the SFP-DDM (Digital Diagnostic Monitor) capability, which greatly simplifies the task of keeping track of real-time SFP parameters like optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage for network administrators.


Information regarding the purchase

Industrial L3 IGS-6325-8T8S 8-Port 10/100/1000T + 8-Port 100/1000X SFP Managed Ethernet Switch.

Hardware Specifications
Copper Ports8 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots2 100/1000/2500BASE-X mini-GBIC SFP ports (Port-9 and Port-10)
PoE Injector Port8 ports with 802.3at/af PoE injector function with Port-1 to Port-8
Switch ArchitectureStore-and-Forward
Switch Fabric26Gbps/non-blocking
Throughput (packet per second)14.88Mpps@ 64 bytes packet
Address Table8K entries, automatic source address learning and aging
Shared Data Buffer4Mbits
Flow ControlIEEE 802.3x pause frame for full duplex
Back pressure for half duplex
Jumbo Frame9Kbytes
Reset Button< 5 sec: System reboot
> 5 sec: Factory default
ESD Protection6KV DC
EnclosureIP30 metal case
InstallationDIN rail kit and wall-mount
ConnectorRemovable 3-pin terminal block for power input
 - Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
 - Pin 3 for earth ground
DC power jack with 2.0mm central pole
LED IndicatorSystem:
 PWR(Green)
 Ring (Green)
 Ring Owner (Green)
Per 10/100/1000T RJ45 PoE+ Ports:
 PoE-in-Use (Orange)
 LNK/ACT (Green)
Per 100/1000/2500BASE-X SFP Interface: :
 100 LNK/ACT (Orange)
 1G/2.5G LNK/ACT (Green)
Dimensions (W x D x H)180 x 24.4 x 140 mm
Weight686g
Power RequirementsDual 48~56V DC (>51V DC for PoE+ output recommended)
Power ConsumptionMax. 7.2 watts/24.7BTU (Power on without any connection)
Max. 251 watts/861.2BTU (Full loading with PoE function)
Power Over Ethernet
PoE StandardIEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply TypeEnd-span
PoE Power OutputIEEE 802.3af Standard
 - Per port 48V~51V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
 - Per port 51V~56V DC (depending on the power supply), max. 36 watts
Power Pin Assignment1/2(+), 3/6(-)
PoE Power Budget240W maximum (depending on power input)
Max. number of Class 2 PDs8
Max. number of Class 3 PDs8
Max. number of Class 4 PDs8
Layer 2 Function
Basic Management InterfacesConsole; Telnet; Web browser; SNMP v1, v2c
Secure Management InterfacesSSH, SSL, SNMP v3
Port ConfigurationPort disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow control disable/enable
Power saving mode control
Port StatusDisplay each port’s speed duplex mode, link status, flow control status,
auto negotiation status, trunk status
Port MirroringTX/RX/both
1 to 1 monitor
VLAN802.1Q tag-based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4094 VLAN IDs
Link AggregationIEEE 802.3ad LACP/static trunk
Supports 2 trunk groups with 2 ports per trunk group
QoSTraffic classification based, strict priority and WRR
8-level priority for switching
 - Port number
 - 802.1p priority
 - 802.1Q VLAN tag
 - DSCP/TOS field in IP packet
IGMP SnoopingIGMP (v1/v2/v3) snooping, up to 255 multicast groups
IGMP querier mode support
MLD SnoopingMLD (v1/v2) snooping, up to 255 multicast groups
MLD querier mode support
Access Control ListIP-based ACL/MAC-based ACL
Up to 256 entries
Bandwidth ControlPer port bandwidth control
Ingress: 500Kb~1000Mbps
Egress: 500Kb~1000Mbps
SNMP MIBsRFC 1213 MIB-II
IF-MIB
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
RFC 2863 Interface MIB
RFC 2665 Ether-Like MIB
RFC 2819 RMON MIB (Groups 1, 2, 3 and 9)
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
IEEE 802.1X PAE
LLDP
MAU-MIB
Layer 3 Function
IP InterfacesMax. 8 VLAN interfaces
Routing TableMax. 32 routing entries
Routing ProtocolsIPv4 software static routing
IPv6 software static routing
Standards Conformance
Regulatory ComplianceFCC Part 15 Class A, CE
Stability TestingIEC60068-2-32 (free fall)
IEC60068-2-27 (shock)
IEC60068-2-6 (vibration)
Standards ComplianceIEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3z Gigabit SX/LX
IEEE 802.3bz 2.5GBASE-X
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1X Port Authentication Network Control
IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
ITU-T G.8032 Ethernet Ring Protection Switching
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP v1
RFC 2236 IGMP v2
Environment
Operating Temperature-20 ~ 70 degrees C
Storage Temperature-40 ~ 85 degrees C
Humidity5 ~ 95% (non-condensing)

Switch for Building Security Automation

The WGS-5225-8P2SV is the best option for locations where tight security must be upheld because it offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can impose limitations on network access by rejecting packets based on source and destination IP addresses, TCP/UDP ports, or designated standard network applications. With the WGS-5225-8P2SV, a tightly controlled network may be created fast and easily.


Related Products

We are the Leading Supplier of L2+ Ring Managed Gigabit Ethernet Switch such as WGS-5225-8P2S, IGS-10020PT, IGS-10020HPT.
Suitable for buildings where security is strictly to be enforced, the WGS-4215-8T2S Industrial Wall-mount Managed Switch offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the WGS-4215-8T2S, a tightly-controlled network can be easily had in no time.
We Serve all these L2+ Ring Managed Gigabit Ethernet Switches in Pune, Mumbai, Kolkata, Bangalore, Chennai, Hyderabad, Delhi, Noida, Thane, Indore, Jaipur, Nagpur, Mangalore, Nashik, Coimbatore, Bhopal, Baroda, Surat, Ahmedabad, GOA, Gurgaon, PAN India